The SPA 504 templates were donated by two developers, and introduced in 4.4
A later email I had read from one of the developers indicated there were
issues, and they were not going to address them because each Cisco release
made changes that created a moving target.
I do have a customer that is running on older SPA942 phones. They have
their quirks, but work for the customer for the most part.
I did manually create a 504G template and have it downloading and working
from sipxecs well.
Have you tried configuring it from the web interface, and not with the
template in sipxecs? You might have better luck.
From: sipx-users-***@list.sipfoundry.org
[mailto:sipx-users-***@list.sipfoundry.org] On Behalf Of Tony Graziano
Sent: Wednesday, November 07, 2012 6:54 AM
To: Discussion list for users of sipXecs software
Subject: Re: [sipx-users] Busy Lamp Field on the SPA504G
Just because the templates are there doesn't mean they are maintained. They
might have worked for whoever initiated the template for the way they were
using it.
I have always found Polycom to give the most predictable results and have
mixed feeling about certain ATA's and gateways in general.
I have centered around a "need for compatibility" using some gateway
products that meet our needs (plain analog calls, no features but also fax
(via t.38) compliant.
Everyone's need is different, but if you get to the point where you have
defined the use case and feature sets, you will get lots of opinions on here
from people who actually deploy and use the stuff they are suggesting you to
use.
I don't know who maintains the SPA templates. I don't know what features are
purported to work properly (or at all).
On Wed, Nov 7, 2012 at 9:44 AM, Richard Bruce <***@dimensionalcom.com>
wrote:
I have made life very difficult. I was ready to drop the SPA as well and
then I loaded SipXecs 4.6 and found that templates have been added for them
and decided to give them another try. I have spent many hours between the
two in the last couple of weeks and would like to be able to give back to
the forum.
Richard Bruce
Dimensional Communications
7915 S. Emerson Ave, Suite 131
Indianapolis, IN 46237
(317) 215-4199- office
(317) 946-1899 - cell
_____
From: sipx-users-***@list.sipfoundry.org
[mailto:sipx-users-***@list.sipfoundry.org] On Behalf Of Michael Picher
Sent: Wednesday, November 07, 2012 9:06 AM
To: Discussion list for users of sipXecs software
Subject: Re: [sipx-users] Busy Lamp Field on the SPA504G
Wow, you're trying to make all the hard stuff work :-)
SPA/Linksys phones, Asterisk as a gateway...
On Wed, Nov 7, 2012 at 8:11 AM, Richard Bruce <***@dimensionalcom.com>
wrote:
I am trying to configure the BLF on the SPA504G. Looking for any info on
how to set up.
Thanks,
Richard Bruce
Dimensional Communications
7915 S. Emerson Ave, Suite 131
Indianapolis, IN 46237
(317) 215-4199- office
(317) 946-1899 <tel:%28317%29%20946-1899> - cell
_______________________________________________
sipx-users mailing list
sipx-***@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/
--
Michael Picher, Director of Technical Services
eZuce, Inc.
300 Brickstone Square
Suite 201
Andover, MA. 01810
O.978-296-1005 X2015
M.207-956-0262
@mpicher <http://twitter.com/mpicher>
linkedin <http://www.linkedin.com/profile/view?id=35504760&trk=tab_pro>
www.ezuce.com
----------------------------------------------------------------------------
--------------------------------
There are 10 kinds of people in the world, those who understand binary and
those who don't.
_______________________________________________
sipx-users mailing list
sipx-***@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users/
--
~~~~~~~~~~~~~~~~~~
Tony Graziano, Manager
Telephone: 434.984.8430
sip: ***@voice.myitdepartment.net
Fax: 434.465.6833
~~~~~~~~~~~~~~~~~~
Linked-In Profile:
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~~~~~~~~~~~~~~~~~
Using or developing for sipXecs from SIPFoundry? Ask me about sipX-CoLab
2013! <http://sipxcolab2013.eventbrite.com/?discount=tony2013>
LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
sip: ***@voice.myitdepartment.net
Helpdesk Customers: http://myhelp.myitdepartment.net
Blog: http://blog.myitdepartment.net