Configure 2 internal SBC

[Domenico Chierico]

We are experiencing some difficulties with to configure sbc stuff for
our needs, and I wish to know if I'm missing something.
We have 2 different internet public addresses, we use one for default
gateway with data transit and a voip trunk and other one that is
dedicated to a specific voip trunk.
So mainly i guess i need to define two internal sbc so that each one
uses an "external address" and associate each voip trunk with right
sbc.

Is this the right way ? Is there some way to configure stuff like this way?

thanks
Domenico Chierico

[Michael Picher]

There's no 'automatic' way to do this.

You will need to run on 2 servers.

Put sipXbridge on the second server, turn it off on the master.

1-to-1 NAT each server to a different outside IP address.

Under Server settings, make sure each server has its externally NAT'd IP
address specified.

Mike

On Mon, Jul 16, 2012 at 4:54 AM, Domenico Chierico <

Post by Domenico Chierico
We are experiencing some difficulties with to configure sbc stuff for
our needs, and I wish to know if I'm missing something.
We have 2 different internet public addresses, we use one for default
gateway with data transit and a voip trunk and other one that is
dedicated to a specific voip trunk.
So mainly i guess i need to define two internal sbc so that each one
uses an "external address" and associate each voip trunk with right
sbc.
Is this the right way ? Is there some way to configure stuff like this way?
thanks
Domenico Chierico
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/

--
Michael Picher, Director of Technical Services
eZuce, Inc.

300 Brickstone Square****

Suite 201****

Andover, MA. 01810
O.978-296-1005 X2015
M.207-956-0262
@mpicher <http://twitter.com/mpicher>
linkedin <http://www.linkedin.com/profile/view?id=35504760&trk=tab_pro>
www.ezuce.com

------------------------------------------------------------------------------------------------------------
There are 10 kinds of people in the world, those who understand binary and
those who don't.

[Tony Graziano]

I think this deserves a wiki how to...

Post by Michael Picher
There's no 'automatic' way to do this.
You will need to run on 2 servers.
Put sipXbridge on the second server, turn it off on the master.
1-to-1 NAT each server to a different outside IP address.
Under Server settings, make sure each server has its externally NAT'd IP
address specified.
Mike
On Mon, Jul 16, 2012 at 4:54 AM, Domenico Chierico <

Post by Domenico Chierico
We are experiencing some difficulties with to configure sbc stuff for
our needs, and I wish to know if I'm missing something.
We have 2 different internet public addresses, we use one for default
gateway with data transit and a voip trunk and other one that is
dedicated to a specific voip trunk.
So mainly i guess i need to define two internal sbc so that each one
uses an "external address" and associate each voip trunk with right
sbc.
Is this the right way ? Is there some way to configure stuff like this way?
thanks
Domenico Chierico
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/

--
Michael Picher, Director of Technical Services
eZuce, Inc.
300 Brickstone Square****
Suite 201****
Andover, MA. 01810
O.978-296-1005 X2015
M.207-956-0262
@mpicher <http://twitter.com/mpicher>
linkedin <http://www.linkedin.com/profile/view?id=35504760&trk=tab_pro>
www.ezuce.com
------------------------------------------------------------------------------------------------------------
There are 10 kinds of people in the world, those who understand binary and
those who don't.
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/

[Michael Picher]

Sorry, I can't do it now… knee deep in trying to get 4.6 documented.

hopefully people can figure it out from what I posted… it's really that simple.

Thanks,
Mike

Post by Tony Graziano
I think this deserves a wiki how to...
There's no 'automatic' way to do this.
You will need to run on 2 servers.
Put sipXbridge on the second server, turn it off on the master.
1-to-1 NAT each server to a different outside IP address.
Under Server settings, make sure each server has its externally NAT'd IP address specified.
Mike
We are experiencing some difficulties with to configure sbc stuff for
our needs, and I wish to know if I'm missing something.
We have 2 different internet public addresses, we use one for default
gateway with data transit and a voip trunk and other one that is
dedicated to a specific voip trunk.
So mainly i guess i need to define two internal sbc so that each one
uses an "external address" and associate each voip trunk with right
sbc.
Is this the right way ? Is there some way to configure stuff like this way?
thanks
Domenico Chierico
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
--
Michael Picher, Director of Technical Services
eZuce, Inc.
300 Brickstone Square
Suite 201
Andover, MA. 01810
O.978-296-1005 X2015
M.207-956-0262
@mpicher <http://twitter.com/mpicher>
linkedin
www.ezuce.com
------------------------------------------------------------------------------------------------------------
There are 10 kinds of people in the world, those who understand binary and those who don't.
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
Telephone: [phone]
Helpdesk Customers: http://myhelp.myitdepartment.net
Blog: http://blog.myitdepartment.net
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/