Karoo Configs

[Chris Rawlings]

i have been reading through the Karoo bridge setup cookbook.. wow

so i was wondering if anyone had any sample configs that would work in this
scenario

IP Based Authentication SIP Trunk ITSP
Unmanaged GW for SipX / eZuce
allow for inbound and outbound dialing/routing of SIP URI's
passthrough for phone registrations


my other question about Karoo is does it need 2 Interfaces... one for WAN
and one for LAN or can i do everything from one interface on port 5060
behind a NAT firewall.
--
Thank You,

Chris Rawlings

BlueCloud Consultants – CEO

Phone. [phone] x201

SIP URI. sip:***@bluecloudconsultants.com

XMPP / Jabber / Google Talk – ***@bluecloudconsultants.com

[Tony Graziano]

It needs two interfaces. It can sit behind a firewall. Both interfaces can
be numbered differently (same man).

Post by Chris Rawlings
i have been reading through the Karoo bridge setup cookbook.. wow
so i was wondering if anyone had any sample configs that would work in
this scenario
IP Based Authentication SIP Trunk ITSP
Unmanaged GW for SipX / eZuce
allow for inbound and outbound dialing/routing of SIP URI's
passthrough for phone registrations
my other question about Karoo is does it need 2 Interfaces... one for WAN
and one for LAN or can i do everything from one interface on port 5060
behind a NAT firewall.
--
Thank You,
Chris Rawlings
BlueCloud Consultants – CEO
Phone. [phone] x201
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/

[Chris Rawlings]

so far i have outbound calling working. i do not have REFER working tho..
it keeps trying to send REFER to the ITSP

i am using two interfaces btw... that fixed up alot of things.. and both
are behing a NAT firewall

Post by Tony Graziano
It needs two interfaces. It can sit behind a firewall. Both interfaces can
be numbered differently (same man).

Post by Chris Rawlings
i have been reading through the Karoo bridge setup cookbook.. wow
so i was wondering if anyone had any sample configs that would work in
this scenario
IP Based Authentication SIP Trunk ITSP
Unmanaged GW for SipX / eZuce
allow for inbound and outbound dialing/routing of SIP URI's
passthrough for phone registrations
my other question about Karoo is does it need 2 Interfaces... one for WAN
and one for LAN or can i do everything from one interface on port 5060
behind a NAT firewall.
--
Thank You,
Chris Rawlings
BlueCloud Consultants – CEO
Phone. [phone] x201
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/

Telephone: [phone]
Helpdesk Customers: http://myhelp.myitdepartment.**net<http://myhelp.myitdepartment.net>
Blog: http://blog.myitdepartment.net
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/

--
Thank You,

Chris Rawlings

BlueCloud Consultants – CEO

Phone. [phone] x201

SIP URI. sip:***@bluecloudconsultants.com

XMPP / Jabber / Google Talk – ***@bluecloudconsultants.com

[Joegen Baclor]

Send me a tarball of /etc/karoo.conf.d and /var/log/karoo/sbc.log. Make
sure it is in debug level . In the command line, just key in:

#/usr/bin/karoo --reset-log-level debug

You can send it to me directly if you don't want to expose your route info.

Joegen


Note: Two interfaces is not required. It just makes routing simpler.
You can use the same interface for both internal and external but you
need to base the routing decision from the source of the packet.

Post by Chris Rawlings
so far i have outbound calling working. i do not have REFER working
tho.. it keeps trying to send REFER to the ITSP
i am using two interfaces btw... that fixed up alot of things.. and
both are behing a NAT firewall
On Mon, Nov 12, 2012 at 7:23 PM, Tony Graziano
It needs two interfaces. It can sit behind a firewall. Both
interfaces can be numbered differently (same man).
i have been reading through the Karoo bridge setup cookbook.. wow
so i was wondering if anyone had any sample configs that would
work in this scenario
IP Based Authentication SIP Trunk ITSP
Unmanaged GW for SipX / eZuce
allow for inbound and outbound dialing/routing of SIP URI's
passthrough for phone registrations
my other question about Karoo is does it need 2 Interfaces...
one for WAN and one for LAN or can i do everything from one
interface on port 5060 behind a NAT firewall.
--
Thank You,
Chris Rawlings
BlueCloud Consultants -- CEO
Phone. [phone] x201 <tel:[phone]%20x201>
XMPP / Jabber / Google Talk --
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
Telephone: [phone] <tel:[phone]>
Helpdesk Customers: http://myhelp.myitdepartment.net
Blog: http://blog.myitdepartment.net
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
--
Thank You,
Chris Rawlings
BlueCloud Consultants -- CEO
Phone. [phone] x201
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/