strangeness, 4.4 CDR

[Michael Scheidell]

I had a sipx crash, while I was on a call.
The CDR still shows the call active.

I went to services->servers->[myserver], CDR and did a restart. didn't help

I logged on to console (root) and typed 'reboot' to reboot.

nothing, still shows call active.


(4.4 installed from i386 cd rom, data restored from a 4.2.1 cd rom
install, that was upgraded to 4.4 and then backed up)

yes, I did a yum upgrade (two weeks ago), and am just doing another one
now, but its only upgrading bind, dhcp initscripts and sudo.

Updated:
bind.i386 30:9.3.6-20.P1.el5_8.2 bind-libs.i386
30:9.3.6-20.P1.el5_8.2 bind-utils.i386 30:9.3.6-20.P1.el5_8.2
caching-nameserver.i386 30:9.3.6-20.P1.el5_8.2 dhclient.i386
12:3.0.5-31.el5_8.1 dhcp.i386 12:3.0.5-31.el5_8.1
initscripts.i386 0:8.45.42-1.el5.centos.1 sudo.i386
0:1.7.2p1-14.el5_8.2

I just restarted CDR again, after yum upgrade, and it said 'CDR [Failed]'

(I did a refresh, and restarted CDR), it restarted and the active call
entry that survived one crash, one CDR restart and one reboot, finally
went away.
--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

*| *SECNAP Network Security Corporation

* Best Mobile Solutions Product of 2011
* Best Intrusion Prevention Product
* Hot Company Finalist 2011
* Best Email Security Product
* Certified SNORT Integrator


______________________________________________________________________
This email has been scanned and certified safe by SpammerTrap(r).
For Information please see http://www.spammertrap.com/
______________________________________________________________________

[Michael Scheidell]

noop, just received a phone call, 10 mins ago, and it does not show up
in CDR at all! 'No details available'

restarting CDR syows 'Failed' [snow details]->

Post by Michael Scheidell
I had a sipx crash, while I was on a call.
The CDR still shows the call active.
(I did a refresh, and restarted CDR), it restarted and the active call
entry that survived one crash, one CDR restart and one reboot, finally
went away.

--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

Post by Michael Scheidell
*| *SECNAP Network Security Corporation

* Best Mobile Solutions Product of 2011
* Best Intrusion Prevention Product
* Hot Company Finalist 2011
* Best Email Security Product
* Certified SNORT Integrator


______________________________________________________________________
This email has been scanned and certified safe by SpammerTrap(r).
For Information please see http://www.spammertrap.com/
______________________________________________________________________

[Tony Graziano]

Did you send the server its profiles and let those services restart?

On Sat, Aug 11, 2012 at 5:07 PM, Michael Scheidell <

noop, just received a phone call, 10 mins ago, and it does not show up in
CDR at all! 'No details available'
restarting CDR syows 'Failed' [snow details]->
I had a sipx crash, while I was on a call.
The CDR still shows the call active.
(I did a refresh, and restarted CDR), it restarted and the active call
entry that survived one crash, one CDR restart and one reboot, finally went
away.
--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

*| *SECNAP Network Security Corporation

- Best Mobile Solutions Product of 2011
- Best Intrusion Prevention Product
- Hot Company Finalist 2011
- Best Email Security Product
- Certified SNORT Integrator
------------------------------
This email has been scanned and certified safe by SpammerTrap®.
For Information please see http://www.spammertrap.com/
------------------------------
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/

--
~~~~~~~~~~~~~~~~~~
Tony Graziano, Manager
Telephone: [phone]
sip: ***@voice.myitdepartment.net
Fax: [phone]
~~~~~~~~~~~~~~~~~~
Linked-In Profile:
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~~~~~~~~~~~~~~~~~

Using or developing for sipXecs from SIPFoundry? Ask me about sipX-CoLab
2013!
<http://sipxcolab2013.eventbrite.com/?discount=tony2013>

[Michael Scheidell]

when, when I rebooted? or when the server crashed?

Post by Tony Graziano
Did you send the server its profiles and let those services restart?

--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

Post by Tony Graziano
*| *SECNAP Network Security Corporation

* Best Mobile Solutions Product of 2011
* Best Intrusion Prevention Product
* Hot Company Finalist 2011
* Best Email Security Product
* Certified SNORT Integrator


______________________________________________________________________
This email has been scanned and certified safe by SpammerTrap(r).
For Information please see http://www.spammertrap.com/
______________________________________________________________________

[Tony Graziano]

usually you would restart the "CallResolver" (I try to do this from the CLI
(sipxprox -r CallResolver, then check it with sipxproc --state, to see if
it restarted or got stuck).

You said something about doing a yum update, but I see you did not update
any sipx rpm's, sending profiles won't help. What is the exact version of
4.4 you are running?

Actually the output of

sipxproc--state

would be helpful (in general).

On Sat, Aug 11, 2012 at 5:11 PM, Michael Scheidell <

Post by Michael Scheidell
when, when I rebooted? or when the server crashed?
Did you send the server its profiles and let those services restart?
--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

*| *SECNAP Network Security Corporation

- Best Mobile Solutions Product of 2011
- Best Intrusion Prevention Product
- Hot Company Finalist 2011
- Best Email Security Product
- Certified SNORT Integrator
------------------------------
This email has been scanned and certified safe by SpammerTrap®.
For Information please see http://www.spammertrap.com/
------------------------------
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/

--
~~~~~~~~~~~~~~~~~~
Tony Graziano, Manager
Telephone: [phone]
sip: ***@voice.myitdepartment.net
Fax: [phone]
~~~~~~~~~~~~~~~~~~
Linked-In Profile:
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~~~~~~~~~~~~~~~~~

Using or developing for sipXecs from SIPFoundry? Ask me about sipX-CoLab
2013!
<http://sipxcolab2013.eventbrite.com/?discount=tony2013>

[Michael Scheidell]

sipXecs (4.4.0- 2012-07-09EDT18:32:10 ip-10-72-43-110)




sipxproc --state
{"CallResolver"=>"Failed",
"FreeSWITCH"=>"Running",
"ResourceListServer"=>"Running",
"PresenceServer"=>"Disabled",
"SIPRegistrar"=>"Running",
"ParkServer"=>"Running",
"sipXimbot"=>"Disabled",
"sipXmrtg"=>"Running",
"SipXrest"=>"Running",
"sipXprovision"=>"Running",
"SipXbridge"=>"Running",
"SharedAppearanceAgent"=>"Running",
"ConfigServer"=>"Running",
"SipXrelay"=>"Running",
"ConfigAgent"=>"Disabled",
"sipXivr"=>"Running",
"SIPStatus"=>"Running",
"CallResolver-Agent"=>"Disabled",
"sipXrecording"=>"Running",
"sipXacccode"=>"Running",
"PageServer"=>"Running",
"SipXopenfire"=>"Disabled",
"ACDServer"=>"Disabled",
"SIPXProxy"=>"Running"}


sipxproc -r CallResolver
{"CallResolver"=>true}
[***@sip sipxpbx]# sipxproc --state
{"SipXopenfire"=>"Disabled",
"sipXimbot"=>"Disabled",
"sipXacccode"=>"Running",
"ParkServer"=>"Running",
"ConfigAgent"=>"Disabled",
"SIPRegistrar"=>"Running",
"sipXprovision"=>"Running",
"FreeSWITCH"=>"Running",
"ConfigServer"=>"Running",
"ResourceListServer"=>"Running",
"SipXbridge"=>"Running",
"sipXivr"=>"Running",
"SipXrelay"=>"Running",
"SIPXProxy"=>"Running",
"PageServer"=>"Running",
"CallResolver"=>"Failed",
"SIPStatus"=>"Running",
"CallResolver-Agent"=>"Disabled",
"sipXrecording"=>"Running",
"PresenceServer"=>"Disabled",
"ACDServer"=>"Disabled",
"sipXmrtg"=>"Running",
"SharedAppearanceAgent"=>"Running",
"SipXrest"=>"Running"}
--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

*| *SECNAP Network Security Corporation

* Best Mobile Solutions Product of 2011
* Best Intrusion Prevention Product
* Hot Company Finalist 2011
* Best Email Security Product
* Certified SNORT Integrator


______________________________________________________________________
This email has been scanned and certified safe by SpammerTrap(r).
For Information please see http://www.spammertrap.com/
______________________________________________________________________

[Tony Graziano]

Hmmm.

does /var/log/sipxpbx/sipxcallresolver.log
or
../sipxconfig.log

show anything of value here?

CDR's have to be flushed (written) to the postgres database. Until they are
written (call completes) postgres is not written too. I am curious if your
postrgres SIPXCDR database has an issue or if there is any type of
diskspace problem. Wild guesses until the logs are looked at...

On Sat, Aug 11, 2012 at 5:18 PM, Michael Scheidell <

Post by Michael Scheidell
sipXecs (4.4.0- 2012-07-09EDT18:32:10 ip-10-72-43-110)
sipxproc --state
{"CallResolver"=>"Failed",
"FreeSWITCH"=>"Running",
"ResourceListServer"=>"Running",
"PresenceServer"=>"Disabled",
"SIPRegistrar"=>"Running",
"ParkServer"=>"Running",
"sipXimbot"=>"Disabled",
"sipXmrtg"=>"Running",
"SipXrest"=>"Running",
"sipXprovision"=>"Running",
"SipXbridge"=>"Running",
"SharedAppearanceAgent"=>"Running",
"ConfigServer"=>"Running",
"SipXrelay"=>"Running",
"ConfigAgent"=>"Disabled",
"sipXivr"=>"Running",
"SIPStatus"=>"Running",
"CallResolver-Agent"=>"Disabled",
"sipXrecording"=>"Running",
"sipXacccode"=>"Running",
"PageServer"=>"Running",
"SipXopenfire"=>"Disabled",
"ACDServer"=>"Disabled",
"SIPXProxy"=>"Running"}
sipxproc -r CallResolver
{"CallResolver"=>true}
{"SipXopenfire"=>"Disabled",
"sipXimbot"=>"Disabled",
"sipXacccode"=>"Running",
"ParkServer"=>"Running",
"ConfigAgent"=>"Disabled",
"SIPRegistrar"=>"Running",
"sipXprovision"=>"Running",
"FreeSWITCH"=>"Running",
"ConfigServer"=>"Running",
"ResourceListServer"=>"Running",
"SipXbridge"=>"Running",
"sipXivr"=>"Running",
"SipXrelay"=>"Running",
"SIPXProxy"=>"Running",
"PageServer"=>"Running",
"CallResolver"=>"Failed",
"SIPStatus"=>"Running",
"CallResolver-Agent"=>"Disabled",
"sipXrecording"=>"Running",
"PresenceServer"=>"Disabled",
"ACDServer"=>"Disabled",
"sipXmrtg"=>"Running",
"SharedAppearanceAgent"=>"Running",
"SipXrest"=>"Running"}
--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

*| *SECNAP Network Security Corporation

- Best Mobile Solutions Product of 2011
- Best Intrusion Prevention Product
- Hot Company Finalist 2011
- Best Email Security Product
- Certified SNORT Integrator
------------------------------
This email has been scanned and certified safe by SpammerTrap®.
For Information please see http://www.spammertrap.com/
------------------------------
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/

--
~~~~~~~~~~~~~~~~~~
Tony Graziano, Manager
Telephone: [phone]
sip: ***@voice.myitdepartment.net
Fax: [phone]
~~~~~~~~~~~~~~~~~~
Linked-In Profile:
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~~~~~~~~~~~~~~~~~

Using or developing for sipXecs from SIPFoundry? Ask me about sipX-CoLab
2013!
<http://sipxcolab2013.eventbrite.com/?discount=tony2013>

[Michael Scheidell]

Post by Tony Graziano
Hmmm.
does /var/log/sipxpbx/sipxcallresolver.log
or
../sipxconfig.log

tail -f sipxconfig.log
"2012-08-11T21:06:47.254000Z":31:JAVA:INFO:sip.secnap.com:P1-19:00000000:XmlRpcClientInterceptor:"XML/RPC
ProcMgmtRpc.getStateAll with [sip.secnap.com] on
https://sip.secnap.com:8092/RPC2"
"2012-08-11T21:06:52.346000Z":32:JAVA:INFO:sip.secnap.com:P1-19:00000000:XmlRpcClientInterceptor:"XML/RPC
ProcMgmtRpc.getStatusMessages with [sip.secnap.com, CallResolver] on
https://sip.secnap.com:8092/RPC2"
"2012-08-11T21:06:52.476000Z":33:JAVA:INFO:sip.secnap.com:P1-19:00000000:XmlRpcClientInterceptor:"XML/RPC
ProcMgmtRpc.getStateAll with [sip.secnap.com] on
https://sip.secnap.com:8092/RPC2"
"2012-08-11T21:07:17.254000Z":34:JAVA:INFO:sip.secnap.com:P1-19:00000000:XmlRpcClientInterceptor:"XML/RPC
ProcMgmtRpc.getStateAll with [sip.secnap.com] on
https://sip.secnap.com:8092/RPC2"
"2012-08-11T21:07:47.250000Z":35:JAVA:INFO:sip.secnap.com:P1-19:00000000:XmlRpcClientInterceptor:"XML/RPC
ProcMgmtRpc.getStateAll with [sip.secnap.com] on
https://sip.secnap.com:8092/RPC2"
"2012-08-11T21:08:17.250000Z":36:JAVA:INFO:sip.secnap.com:P1-19:00000000:XmlRpcClientInterceptor:"XML/RPC
ProcMgmtRpc.getStateAll with [sip.secnap.com] on
https://sip.secnap.com:8092/RPC2"
"2012-08-11T21:08:47.250000Z":37:JAVA:INFO:sip.secnap.com:P1-19:00000000:XmlRpcClientInterceptor:"XML/RPC
ProcMgmtRpc.getStateAll with [sip.secnap.com] on
https://sip.secnap.com:8092/RPC2"
"2012-08-11T21:09:17.252000Z":38:JAVA:INFO:sip.secnap.com:P1-19:00000000:XmlRpcClientInterceptor:"XML/RPC
ProcMgmtRpc.getStateAll with [sip.secnap.com] on
https://sip.secnap.com:8092/RPC2"
"2012-08-11T21:09:47.250000Z":39:JAVA:INFO:sip.secnap.com:P1-19:00000000:XmlRpcClientInterceptor:"XML/RPC
ProcMgmtRpc.getStateAll with [sip.secnap.com] on
https://sip.secnap.com:8092/RPC2"
"2012-08-11T21:10:17.254000Z":40:JAVA:INFO:sip.secnap.com:P1-19:00000000:XmlRpcClientInterceptor:"XML/RPC
ProcMgmtRpc.getStateAll with [sip.secnap.com] on
https://sip.secnap.com:8092/RPC2"
--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

Post by Tony Graziano
*| *SECNAP Network Security Corporation

* Best Mobile Solutions Product of 2011
* Best Intrusion Prevention Product
* Hot Company Finalist 2011
* Best Email Security Product
* Certified SNORT Integrator


______________________________________________________________________
This email has been scanned and certified safe by SpammerTrap(r).
For Information please see http://www.spammertrap.com/
______________________________________________________________________

[Michael Scheidell]

Post by Tony Graziano
Hmmm.
does /var/log/sipxpbx/sipxcallresolver.log

"2012-08-11T21:31:54.571371Z":1:CDR:ERR:sip.secnap.com:main:00000000:cdr:"Problems
with CDR DB connection."
"2012-08-11T21:31:54.571637Z":2:CDR:ERR:sip.secnap.com:main:00000000:cdr:"Exiting
because of error: <could not translate host name \"localhost\" to
address: Name or service not known\n>"

im guessing the bind updates phucked things up.

but:

host -t a localhost
localhost has address 127.0.0.1

dig localhost

; <<>> DiG 9.3.6-P1-RedHat-9.3.6-20.P1.el5_8.2 <<>> localhost
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 12486
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0

;; QUESTION SECTION:
;localhost. IN A

;; ANSWER SECTION:
localhost. 86314 IN A 127.0.0.1

;; AUTHORITY SECTION:
localhost. 86314 IN NS localhost.

;; Query time: 0 msec
;; SERVER: 127.0.0.1#53(127.0.0.1)
;; WHEN: Sat Aug 11 17:33:02 2012
;; MSG SIZE rcvd: 57


grep localhost /etc/hosts
127.0.0.1 localhost.localdomain localhost
--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

Post by Tony Graziano
*| *SECNAP Network Security Corporation

* Best Mobile Solutions Product of 2011
* Best Intrusion Prevention Product
* Hot Company Finalist 2011
* Best Email Security Product
* Certified SNORT Integrator


______________________________________________________________________
This email has been scanned and certified safe by SpammerTrap(r).
For Information please see http://www.spammertrap.com/
______________________________________________________________________

[Tony Graziano]

that would do it!! It created a zone "localhost" for you?

My 5 year old would say "What the WHAT!"

On Sat, Aug 11, 2012 at 5:33 PM, Michael Scheidell <

Post by Tony Graziano
Hmmm.
does /var/log/sipxpbx/sipxcallresolver.log
"2012-08-11T21:31:54.571371Z":1:CDR:ERR:sip.secnap.com:main:00000000:cdr:"Problems
with CDR DB connection."
"2012-08-11T21:31:54.571637Z":2:CDR:ERR:sip.secnap.com:main:00000000:cdr:"Exiting
Name or service not known\n>"
im guessing the bind updates phucked things up.
host -t a localhost
localhost has address 127.0.0.1
dig localhost
; <<>> DiG 9.3.6-P1-RedHat-9.3.6-20.P1.el5_8.2 <<>> localhost
;; global options: printcmd
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 12486
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0
;localhost. IN A
localhost. 86314 IN A 127.0.0.1
localhost. 86314 IN NS localhost.
;; Query time: 0 msec
;; SERVER: 127.0.0.1#53(127.0.0.1)
;; WHEN: Sat Aug 11 17:33:02 2012
;; MSG SIZE rcvd: 57
grep localhost /etc/hosts
127.0.0.1 localhost.localdomain localhost

127.0.0.1 localhost.localdomain localhost
<ipaddress> <fqdn>

Post by Tony Graziano
--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

*| *SECNAP Network Security Corporation

- Best Mobile Solutions Product of 2011
- Best Intrusion Prevention Product
- Hot Company Finalist 2011
- Best Email Security Product
- Certified SNORT Integrator
------------------------------
This email has been scanned and certified safe by SpammerTrap®.
For Information please see http://www.spammertrap.com/
------------------------------
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/

--
~~~~~~~~~~~~~~~~~~
Tony Graziano, Manager
Telephone: [phone]
sip: ***@voice.myitdepartment.net
Fax: [phone]
~~~~~~~~~~~~~~~~~~
Linked-In Profile:
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~~~~~~~~~~~~~~~~~

Using or developing for sipXecs from SIPFoundry? Ask me about sipX-CoLab
2013!
<http://sipxcolab2013.eventbrite.com/?discount=tony2013>

[Michael Scheidell]

sure.. .

go check on your system, you will get exactly the same results.

Post by Tony Graziano
that would do it!! It created a zone "localhost" for you?
My 5 year old would say "What the WHAT!"
On Sat, Aug 11, 2012 at 5:33 PM, Michael Scheidell

Post by Tony Graziano
Hmmm.
does /var/log/sipxpbx/sipxcallresolver.log

"2012-08-11T21:31:54.571371Z":1:CDR:ERR:sip.secnap.com:main:00000000:cdr:"Problems
with CDR DB connection."
"2012-08-11T21:31:54.571637Z":2:CDR:ERR:sip.secnap.com:main:00000000:cdr:"Exiting
because of error: <could not translate host name \"localhost\" to
address: Name or service not known\n>"
im guessing the bind updates phucked things up.
host -t a localhost
localhost has address 127.0.0.1
dig localhost
; <<>> DiG 9.3.6-P1-RedHat-9.3.6-20.P1.el5_8.2 <<>> localhost
;; global options: printcmd
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 12486
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0
;localhost. IN A
localhost. 86314 IN A 127.0.0.1
localhost. 86314 IN NS localhost.
;; Query time: 0 msec
;; SERVER: 127.0.0.1#53(127.0.0.1)
;; WHEN: Sat Aug 11 17:33:02 2012
;; MSG SIZE rcvd: 57
grep localhost /etc/hosts
127.0.0.1 localhost.localdomain localhost
127.0.0.1 localhost.localdomain localhost
<ipaddress> <fqdn>
--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

Post by Tony Graziano
*| *SECNAP Network Security Corporation

* Best Mobile Solutions Product of 2011
* Best Intrusion Prevention Product
* Hot Company Finalist 2011
* Best Email Security Product
* Certified SNORT Integrator
------------------------------------------------------------------------
This email has been scanned and certified safe by SpammerTrap®.
For Information please see http://www.spammertrap.com/
------------------------------------------------------------------------
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
--
~~~~~~~~~~~~~~~~~~
Tony Graziano, Manager
Telephone: [phone]
Fax: [phone]
~~~~~~~~~~~~~~~~~~
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~~~~~~~~~~~~~~~~~
Using or developing for sipXecs from SIPFoundry? Ask me about
sipX-CoLab 2013!
<http://sipxcolab2013.eventbrite.com/?discount=tony2013>
Telephone: [phone]
Helpdesk Customers: http://myhelp.myitdepartment.net
<http://myhelp.myitdepartment.net>
Blog: http://blog.myitdepartment.net
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/

--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

Post by Tony Graziano
*| *SECNAP Network Security Corporation

* Best Mobile Solutions Product of 2011
* Best Intrusion Prevention Product
* Hot Company Finalist 2011
* Best Email Security Product
* Certified SNORT Integrator


______________________________________________________________________
This email has been scanned and certified safe by SpammerTrap(r).
For Information please see http://www.spammertrap.com/
______________________________________________________________________

[Michael Scheidell]

service postgresql start
Starting postgresql service: [FAILED]
[***@sip init.d]# service postgresql stop
Stopping postgresql service: [FAILED]
--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

*| *SECNAP Network Security Corporation

* Best Mobile Solutions Product of 2011
* Best Intrusion Prevention Product
* Hot Company Finalist 2011
* Best Email Security Product
* Certified SNORT Integrator


______________________________________________________________________
This email has been scanned and certified safe by SpammerTrap(r).
For Information please see http://www.spammertrap.com/
______________________________________________________________________

[Michael Scheidell]

sipx-restore -c configuration.tar.gz
Restore script invoked at Sat Aug 11 22:37:30 UTC 2012, INTERACTIVE=yes.
PostgreSQL does not appear to be running.
You must start it in order to Restore.
--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

*| *SECNAP Network Security Corporation

* Best Mobile Solutions Product of 2011
* Best Intrusion Prevention Product
* Hot Company Finalist 2011
* Best Email Security Product
* Certified SNORT Integrator


______________________________________________________________________
This email has been scanned and certified safe by SpammerTrap(r).
For Information please see http://www.spammertrap.com/
______________________________________________________________________

[Michael Scheidell]

/etc/hosts has not changed since 7/28:

ls -l /etc/hosts
-rw-r--r-- 2 root root 175 Jul 28 22:49 /etc/hosts

neither has /etc/named.conf
ls -lt named.conf
-rw-r--r-- 1 root named 723 Jul 28 22:49 named.conf

there is no localhost zone.

ls -lt *zone*
-rw-r----- 1 root named 955 Jul 31 00:18 named.rfc1912.zones
[***@sip etc]# ls -lt *localhost*
ls: *localhost*: No such file or directory
[***@sip etc]#



reboot gets me this and port 8443 no longer responds.

sipxproc --state
{"SIPStatus"=>"Running",
"sipXrecording"=>"Running",
"PresenceServer"=>"Disabled",
"sipXivr"=>"Running",
"SipXbridge"=>"Running",
"SharedAppearanceAgent"=>"Running",
"ACDServer"=>"Disabled",
"sipXprovision"=>"Running",
"PageServer"=>"Running",
"ParkServer"=>"Running",
"CallResolver-Agent"=>"Disabled",
"ConfigAgent"=>"Disabled",
"sipXimbot"=>"Disabled",
"SipXrest"=>"Running",
"SIPRegistrar"=>"Running",
"SipXopenfire"=>"Disabled",
"ResourceListServer"=>"Running",
"CallResolver"=>"ConfigurationTestFailed",
"sipXmrtg"=>"Running",
"ConfigServer"=>"ConfigurationTestFailed",
"sipXacccode"=>"Running",
"FreeSWITCH"=>"Running",
"SIPXProxy"=>"Running",
"SipXrelay"=>"Running"}

Post by Tony Graziano
sipxproc --state

--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

Post by Tony Graziano
*| *SECNAP Network Security Corporation

* Best Mobile Solutions Product of 2011
* Best Intrusion Prevention Product
* Hot Company Finalist 2011
* Best Email Security Product
* Certified SNORT Integrator


______________________________________________________________________
This email has been scanned and certified safe by SpammerTrap(r).
For Information please see http://www.spammertrap.com/
______________________________________________________________________

[Tony Graziano]

ok...

I think the hosts file should say this. Then if it does, dig should refer
to the hosts file first in order of preference instead of looking it up:

/etc/hosts
127.0.0.1 localhost.localdomain localhost
<ipaddress> <fqdn> <hostname>
(ex: 10.1.2.3 sipx.mydomain.com sipx

on my sipx system, /etc/resolv.conf:
search "sipdomain" (without quotes)
nameserver 127.0.0.1
nameserver 8.8.8.8
nameserver 8.8.4.4

my /var/named director has a localhost.zone file:

$TTL 86400
@ IN SOA @ root (
42 ; serial (d. adams)
3H ; refresh
15M ; retry
1W ; expiry
1D ) ; minimum

IN NS @
IN A 127.0.0.1
IN AAAA ::1




On Sat, Aug 11, 2012 at 5:49 PM, Michael Scheidell <

Post by Michael Scheidell
ls -l /etc/hosts
-rw-r--r-- 2 root root 175 Jul 28 22:49 /etc/hosts
neither has /etc/named.conf
ls -lt named.conf
-rw-r--r-- 1 root named 723 Jul 28 22:49 named.conf
there is no localhost zone.
ls -lt *zone*
-rw-r----- 1 root named 955 Jul 31 00:18 named.rfc1912.zones
ls: *localhost*: No such file or directory
reboot gets me this and port 8443 no longer responds.
sipxproc --state
{"SIPStatus"=>"Running",
"sipXrecording"=>"Running",
"PresenceServer"=>"Disabled",
"sipXivr"=>"Running",
"SipXbridge"=>"Running",
"SharedAppearanceAgent"=>"Running",
"ACDServer"=>"Disabled",
"sipXprovision"=>"Running",
"PageServer"=>"Running",
"ParkServer"=>"Running",
"CallResolver-Agent"=>"Disabled",
"ConfigAgent"=>"Disabled",
"sipXimbot"=>"Disabled",
"SipXrest"=>"Running",
"SIPRegistrar"=>"Running",
"SipXopenfire"=>"Disabled",
"ResourceListServer"=>"Running",
"CallResolver"=>"ConfigurationTestFailed",
"sipXmrtg"=>"Running",
"ConfigServer"=>"ConfigurationTestFailed",
"sipXacccode"=>"Running",
"FreeSWITCH"=>"Running",
"SIPXProxy"=>"Running",
"SipXrelay"=>"Running"}
sipxproc --state
--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

*| *SECNAP Network Security Corporation

- Best Mobile Solutions Product of 2011
- Best Intrusion Prevention Product
- Hot Company Finalist 2011
- Best Email Security Product
- Certified SNORT Integrator
------------------------------
This email has been scanned and certified safe by SpammerTrap®.
For Information please see http://www.spammertrap.com/
------------------------------
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/

--
~~~~~~~~~~~~~~~~~~
Tony Graziano, Manager
Telephone: [phone]
sip: ***@voice.myitdepartment.net
Fax: [phone]
~~~~~~~~~~~~~~~~~~
Linked-In Profile:
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~~~~~~~~~~~~~~~~~

Using or developing for sipXecs from SIPFoundry? Ask me about sipX-CoLab
2013!
<http://sipxcolab2013.eventbrite.com/?discount=tony2013>

[Michael Scheidell]

so, run 'dig localhost' on yours. you will get same. I suspect the yum
update borked things.
maybe we want to warn people NOT to run yum update?


nothing changed:

cd /var/named/
[***@sip named]# ls
chroot data localdomain.zone localhost.zone named.broadcast
named.ca named.ip6.local named.local named.zero slaves
[***@sip named]# ls -lt
total 52
-rw-r----- 1 root named 198 Jul 31 00:18 localdomain.zone
-rw-r----- 1 root named 195 Jul 31 00:18 localhost.zone
-rw-r----- 1 root named 427 Jul 31 00:18 named.broadcast
-rw-r----- 1 root named 1892 Jul 31 00:18 named.ca
-rw-r----- 1 root named 424 Jul 31 00:18 named.ip6.local
-rw-r----- 1 root named 426 Jul 31 00:18 named.local
-rw-r----- 1 root named 427 Jul 31 00:18 named.zero
drwxrwx--- 2 named named 4096 Jul 31 00:17 data
drwxrwx--- 2 named named 4096 Jul 31 00:17 slaves
drwxr-x--- 5 root named 4096 Jul 28 22:43 chroot


cat /etc/resolv.conf
search secnap.com
nameserver 127.0.0.1
nameserver 10.70.1.2
nameserver 10.70.1.1

Post by Tony Graziano
ok...
I think the hosts file should say this. Then if it does, dig should
refer to the hosts file first in order of preference instead of
/etc/hosts
127.0.0.1 localhost.localdomain localhost
<ipaddress> <fqdn> <hostname>
(ex: 10.1.2.3 sipx.mydomain.com <http://sipx.mydomain.com> sipx
search "sipdomain" (without quotes)
nameserver 127.0.0.1
nameserver 8.8.8.8
nameserver 8.8.4.4
$TTL 86400
@ IN SOA @ root (
42 ; serial (d. adams)
3H ; refresh
15M ; retry
1W ; expiry
1D ) ; minimum
IN A 127.0.0.1
IN AAAA ::1
On Sat, Aug 11, 2012 at 5:49 PM, Michael Scheidell
ls -l /etc/hosts
-rw-r--r-- 2 root root 175 Jul 28 22:49 /etc/hosts
neither has /etc/named.conf
ls -lt named.conf
-rw-r--r-- 1 root named 723 Jul 28 22:49 named.conf
there is no localhost zone.
ls -lt *zone*
-rw-r----- 1 root named 955 Jul 31 00:18 named.rfc1912.zones
ls: *localhost*: No such file or directory
reboot gets me this and port 8443 no longer responds.
sipxproc --state
{"SIPStatus"=>"Running",
"sipXrecording"=>"Running",
"PresenceServer"=>"Disabled",
"sipXivr"=>"Running",
"SipXbridge"=>"Running",
"SharedAppearanceAgent"=>"Running",
"ACDServer"=>"Disabled",
"sipXprovision"=>"Running",
"PageServer"=>"Running",
"ParkServer"=>"Running",
"CallResolver-Agent"=>"Disabled",
"ConfigAgent"=>"Disabled",
"sipXimbot"=>"Disabled",
"SipXrest"=>"Running",
"SIPRegistrar"=>"Running",
"SipXopenfire"=>"Disabled",
"ResourceListServer"=>"Running",
"CallResolver"=>"ConfigurationTestFailed",
"sipXmrtg"=>"Running",
"ConfigServer"=>"ConfigurationTestFailed",
"sipXacccode"=>"Running",
"FreeSWITCH"=>"Running",
"SIPXProxy"=>"Running",
"SipXrelay"=>"Running"}

Post by Tony Graziano
sipxproc --state

--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

Post by Tony Graziano
*| *SECNAP Network Security Corporation

* Best Mobile Solutions Product of 2011
* Best Intrusion Prevention Product
* Hot Company Finalist 2011
* Best Email Security Product
* Certified SNORT Integrator
------------------------------------------------------------------------
This email has been scanned and certified safe by SpammerTrap®.
For Information please see http://www.spammertrap.com/
------------------------------------------------------------------------
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
--
~~~~~~~~~~~~~~~~~~
Tony Graziano, Manager
Telephone: [phone]
Fax: [phone]
~~~~~~~~~~~~~~~~~~
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~~~~~~~~~~~~~~~~~
Using or developing for sipXecs from SIPFoundry? Ask me about
sipX-CoLab 2013!
<http://sipxcolab2013.eventbrite.com/?discount=tony2013>
Telephone: [phone]
Helpdesk Customers: http://myhelp.myitdepartment.net
<http://myhelp.myitdepartment.net>
Blog: http://blog.myitdepartment.net
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/

--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

Post by Tony Graziano
*| *SECNAP Network Security Corporation

* Best Mobile Solutions Product of 2011
* Best Intrusion Prevention Product
* Hot Company Finalist 2011
* Best Email Security Product
* Certified SNORT Integrator


______________________________________________________________________
This email has been scanned and certified safe by SpammerTrap(r).
For Information please see http://www.spammertrap.com/
______________________________________________________________________

[Tony Graziano]

on 4.4 there are a few proprietary lines (not the case in 4.6) for the
named.conf file.

// WARNING: Name server configuration is a sipX automatically generated
file.
// Contents may be overwritten unless you change the mode to
"Manual".
// Available modes:
// "Master" - Master name server (on primary server).
// "Slave" - Slave named server (on distributed server).
// "Caching" - Caching only name server.
// "Manual" - Blocks future automatic updates.
// DNS_MODE="Manual"

The DNS mode is defaulted to Master, but by putting it to Manual it means
sipx will not overwirite changes. Are these lines still in yours?

On Sat, Aug 11, 2012 at 6:02 PM, Michael Scheidell <

Post by Michael Scheidell
so, run 'dig localhost' on yours. you will get same. I suspect the yum
update borked things.
maybe we want to warn people NOT to run yum update?
cd /var/named/
chroot data localdomain.zone localhost.zone named.broadcast named.ca
named.ip6.local named.local named.zero slaves
total 52
-rw-r----- 1 root named 198 Jul 31 00:18 localdomain.zone
-rw-r----- 1 root named 195 Jul 31 00:18 localhost.zone
-rw-r----- 1 root named 427 Jul 31 00:18 named.broadcast
-rw-r----- 1 root named 1892 Jul 31 00:18 named.ca
-rw-r----- 1 root named 424 Jul 31 00:18 named.ip6.local
-rw-r----- 1 root named 426 Jul 31 00:18 named.local
-rw-r----- 1 root named 427 Jul 31 00:18 named.zero
drwxrwx--- 2 named named 4096 Jul 31 00:17 data
drwxrwx--- 2 named named 4096 Jul 31 00:17 slaves
drwxr-x--- 5 root named 4096 Jul 28 22:43 chroot
cat /etc/resolv.conf
search secnap.com
nameserver 127.0.0.1
nameserver 10.70.1.2
nameserver 10.70.1.1
ok...
I think the hosts file should say this. Then if it does, dig should
refer to the hosts file first in order of preference instead of looking it
/etc/hosts
127.0.0.1 localhost.localdomain localhost
<ipaddress> <fqdn> <hostname>
(ex: 10.1.2.3 sipx.mydomain.com sipx
search "sipdomain" (without quotes)
nameserver 127.0.0.1
nameserver 8.8.8.8
nameserver 8.8.4.4
$TTL 86400
@ IN SOA @ root (
42 ; serial (d. adams)
3H ; refresh
15M ; retry
1W ; expiry
1D ) ; minimum
IN A 127.0.0.1
IN AAAA ::1
On Sat, Aug 11, 2012 at 5:49 PM, Michael Scheidell <

Post by Michael Scheidell
ls -l /etc/hosts
-rw-r--r-- 2 root root 175 Jul 28 22:49 /etc/hosts
neither has /etc/named.conf
ls -lt named.conf
-rw-r--r-- 1 root named 723 Jul 28 22:49 named.conf
there is no localhost zone.
ls -lt *zone*
-rw-r----- 1 root named 955 Jul 31 00:18 named.rfc1912.zones
ls: *localhost*: No such file or directory
reboot gets me this and port 8443 no longer responds.
sipxproc --state
{"SIPStatus"=>"Running",
"sipXrecording"=>"Running",
"PresenceServer"=>"Disabled",
"sipXivr"=>"Running",
"SipXbridge"=>"Running",
"SharedAppearanceAgent"=>"Running",
"ACDServer"=>"Disabled",
"sipXprovision"=>"Running",
"PageServer"=>"Running",
"ParkServer"=>"Running",
"CallResolver-Agent"=>"Disabled",
"ConfigAgent"=>"Disabled",
"sipXimbot"=>"Disabled",
"SipXrest"=>"Running",
"SIPRegistrar"=>"Running",
"SipXopenfire"=>"Disabled",
"ResourceListServer"=>"Running",
"CallResolver"=>"ConfigurationTestFailed",
"sipXmrtg"=>"Running",
"ConfigServer"=>"ConfigurationTestFailed",
"sipXacccode"=>"Running",
"FreeSWITCH"=>"Running",
"SIPXProxy"=>"Running",
"SipXrelay"=>"Running"}
sipxproc --state
--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

*| *SECNAP Network Security Corporation

- Best Mobile Solutions Product of 2011
- Best Intrusion Prevention Product
- Hot Company Finalist 2011
- Best Email Security Product
- Certified SNORT Integrator
------------------------------
This email has been scanned and certified safe by SpammerTrap®.
For Information please see http://www.spammertrap.com/
------------------------------
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/

--
~~~~~~~~~~~~~~~~~~
Tony Graziano, Manager
Telephone: [phone]
Fax: [phone]
~~~~~~~~~~~~~~~~~~
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~~~~~~~~~~~~~~~~~
Using or developing for sipXecs from SIPFoundry? Ask me about sipX-CoLab
2013!
<http://sipxcolab2013.eventbrite.com/?discount=tony2013>
Telephone: [phone]
Helpdesk Customers: http://myhelp.myitdepartment.**net<http://myhelp.myitdepartment.net>
Blog: http://blog.myitdepartment.net
_______________________________________________
List Archive: http://list.sipfoundry.org/archive/sipx-users/
--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

Post by Michael Scheidell
*| *SECNAP Network Security Corporation

- Best Mobile Solutions Product of 2011
- Best Intrusion Prevention Product
- Hot Company Finalist 2011
- Best Email Security Product
- Certified SNORT Integrator
------------------------------
This email has been scanned and certified safe by SpammerTrap®.
For Information please see http://www.spammertrap.com/
------------------------------
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/

--
~~~~~~~~~~~~~~~~~~
Tony Graziano, Manager
Telephone: [phone]
sip: ***@voice.myitdepartment.net
Fax: [phone]
~~~~~~~~~~~~~~~~~~
Linked-In Profile:
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~~~~~~~~~~~~~~~~~

Using or developing for sipXecs from SIPFoundry? Ask me about sipX-CoLab
2013!
<http://sipxcolab2013.eventbrite.com/?discount=tony2013>

[Michael Scheidell]

this part scares me:

(oh, and phones are totally down, and I have a customer in amsterdam,
who is down)

Post by Michael Scheidell
"ResourceListServer"=>"Running",
"CallResolver"=>"ConfigurationTestFailed",
"sipXmrtg"=>"Running",
"ConfigServer"=>"ConfigurationTestFailed",

--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

Post by Michael Scheidell
*| *SECNAP Network Security Corporation

* Best Mobile Solutions Product of 2011
* Best Intrusion Prevention Product
* Hot Company Finalist 2011
* Best Email Security Product
* Certified SNORT Integrator


______________________________________________________________________
This email has been scanned and certified safe by SpammerTrap(r).
For Information please see http://www.spammertrap.com/
______________________________________________________________________

[Michael Scheidell]

ok, phones answer, and I can call out, but no gui at all anymore.

Post by Michael Scheidell
(oh, and phones are totally down, and I have a customer in amsterdam,
who is down)

Post by Michael Scheidell
"ResourceListServer"=>"Running",
"CallResolver"=>"ConfigurationTestFailed",
"sipXmrtg"=>"Running",
"ConfigServer"=>"ConfigurationTestFailed",

--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

Post by Michael Scheidell
*| *SECNAP Network Security Corporation

* Best Mobile Solutions Product of 2011
* Best Intrusion Prevention Product
* Hot Company Finalist 2011
* Best Email Security Product
* Certified SNORT Integrator

--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

Post by Michael Scheidell
*| *SECNAP Network Security Corporation

* Best Mobile Solutions Product of 2011
* Best Intrusion Prevention Product
* Hot Company Finalist 2011
* Best Email Security Product
* Certified SNORT Integrator


______________________________________________________________________
This email has been scanned and certified safe by SpammerTrap(r).
For Information please see http://www.spammertrap.com/
______________________________________________________________________

[Michael Scheidell]

ls -l /etc/named.conf
-rw-r--r-- 1 root named 723 Jul 28 22:49 /etc/named.conf

not changed: (i think the yum update replaced some libraries that are
really BAD.. do a yum update (and don't say 'y') and see if it wants to
update what it wanted to for me.

more /etc/named.conf
// WARNING: Name server configuration is a sipX automatically generated
file.
// Contents may be overwritten unless you change the mode to
"Manual".
// Available modes:
// "Master" - Master name server (on primary server).
// "Slave" - Slave named server (on distributed server).
// "Caching" - Caching only name server.
// "Manual" - Blocks future automatic updates.
// DNS_MODE="Caching"
//

options {
directory "/var/named";
dump-file "/var/named/data/cache_dump.db";
statistics-file "/var/named/data/named_stats.txt";
forwarders {
10.70.1.2;
10.70.1.1;
};
forward only;
};

Post by Tony Graziano
ok...
I think the hosts file should say this. Then if it does, dig should
refer to the hosts file first in order of preference instead of
/etc/hosts
127.0.0.1 localhost.localdomain localhost
<ipaddress> <fqdn> <hostname>
(ex: 10.1.2.3 sipx.mydomain.com <http://sipx.mydomain.com> sipx
search "sipdomain" (without quotes)
nameserver 127.0.0.1
nameserver 8.8.8.8
nameserver 8.8.4.4
$TTL 86400
@ IN SOA @ root (
42 ; serial (d. adams)
3H ; refresh
15M ; retry
1W ; expiry
1D ) ; minimum
IN A 127.0.0.1
IN AAAA ::1
On Sat, Aug 11, 2012 at 5:49 PM, Michael Scheidell
ls -l /etc/hosts
-rw-r--r-- 2 root root 175 Jul 28 22:49 /etc/hosts
neither has /etc/named.conf
ls -lt named.conf
-rw-r--r-- 1 root named 723 Jul 28 22:49 named.conf
there is no localhost zone.
ls -lt *zone*
-rw-r----- 1 root named 955 Jul 31 00:18 named.rfc1912.zones
ls: *localhost*: No such file or directory
reboot gets me this and port 8443 no longer responds.
sipxproc --state
{"SIPStatus"=>"Running",
"sipXrecording"=>"Running",
"PresenceServer"=>"Disabled",
"sipXivr"=>"Running",
"SipXbridge"=>"Running",
"SharedAppearanceAgent"=>"Running",
"ACDServer"=>"Disabled",
"sipXprovision"=>"Running",
"PageServer"=>"Running",
"ParkServer"=>"Running",
"CallResolver-Agent"=>"Disabled",
"ConfigAgent"=>"Disabled",
"sipXimbot"=>"Disabled",
"SipXrest"=>"Running",
"SIPRegistrar"=>"Running",
"SipXopenfire"=>"Disabled",
"ResourceListServer"=>"Running",
"CallResolver"=>"ConfigurationTestFailed",
"sipXmrtg"=>"Running",
"ConfigServer"=>"ConfigurationTestFailed",
"sipXacccode"=>"Running",
"FreeSWITCH"=>"Running",
"SIPXProxy"=>"Running",
"SipXrelay"=>"Running"}

Post by Tony Graziano
sipxproc --state

--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

Post by Tony Graziano
*| *SECNAP Network Security Corporation

* Best Mobile Solutions Product of 2011
* Best Intrusion Prevention Product
* Hot Company Finalist 2011
* Best Email Security Product
* Certified SNORT Integrator
------------------------------------------------------------------------
This email has been scanned and certified safe by SpammerTrap®.
For Information please see http://www.spammertrap.com/
------------------------------------------------------------------------
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
--
~~~~~~~~~~~~~~~~~~
Tony Graziano, Manager
Telephone: [phone]
Fax: [phone]
~~~~~~~~~~~~~~~~~~
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~~~~~~~~~~~~~~~~~
Using or developing for sipXecs from SIPFoundry? Ask me about
sipX-CoLab 2013!
<http://sipxcolab2013.eventbrite.com/?discount=tony2013>
Telephone: [phone]
Helpdesk Customers: http://myhelp.myitdepartment.net
<http://myhelp.myitdepartment.net>
Blog: http://blog.myitdepartment.net
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/

--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

Post by Tony Graziano
*| *SECNAP Network Security Corporation

* Best Mobile Solutions Product of 2011
* Best Intrusion Prevention Product
* Hot Company Finalist 2011
* Best Email Security Product
* Certified SNORT Integrator


______________________________________________________________________
This email has been scanned and certified safe by SpammerTrap(r).
For Information please see http://www.spammertrap.com/
______________________________________________________________________

[Tony Graziano]

Yes, it has those same ones, they were not there this morning either! I
expect f you roll back you might be ok. Thanks for the warning though!

On Sat, Aug 11, 2012 at 6:13 PM, Michael Scheidell <

Post by Michael Scheidell
ls -l /etc/named.conf
-rw-r--r-- 1 root named 723 Jul 28 22:49 /etc/named.conf
not changed: (i think the yum update replaced some libraries that are
really BAD.. do a yum update (and don't say 'y') and see if it wants to
update what it wanted to for me.
more /etc/named.conf
// WARNING: Name server configuration is a sipX automatically generated
file.
// Contents may be overwritten unless you change the mode to
"Manual".
// "Master" - Master name server (on primary server).
// "Slave" - Slave named server (on distributed server).
// "Caching" - Caching only name server.
// "Manual" - Blocks future automatic updates.
// DNS_MODE="Caching"
//
options {
directory "/var/named";
dump-file "/var/named/data/cache_dump.db";
statistics-file "/var/named/data/named_stats.txt";
forwarders {
10.70.1.2;
10.70.1.1;
};
forward only;
};
ok...
I think the hosts file should say this. Then if it does, dig should
refer to the hosts file first in order of preference instead of looking it
/etc/hosts
127.0.0.1 localhost.localdomain localhost
<ipaddress> <fqdn> <hostname>
(ex: 10.1.2.3 sipx.mydomain.com sipx
search "sipdomain" (without quotes)
nameserver 127.0.0.1
nameserver 8.8.8.8
nameserver 8.8.4.4
$TTL 86400
@ IN SOA @ root (
42 ; serial (d. adams)
3H ; refresh
15M ; retry
1W ; expiry
1D ) ; minimum
IN A 127.0.0.1
IN AAAA ::1
On Sat, Aug 11, 2012 at 5:49 PM, Michael Scheidell <

Post by Michael Scheidell
ls -l /etc/hosts
-rw-r--r-- 2 root root 175 Jul 28 22:49 /etc/hosts
neither has /etc/named.conf
ls -lt named.conf
-rw-r--r-- 1 root named 723 Jul 28 22:49 named.conf
there is no localhost zone.
ls -lt *zone*
-rw-r----- 1 root named 955 Jul 31 00:18 named.rfc1912.zones
ls: *localhost*: No such file or directory
reboot gets me this and port 8443 no longer responds.
sipxproc --state
{"SIPStatus"=>"Running",
"sipXrecording"=>"Running",
"PresenceServer"=>"Disabled",
"sipXivr"=>"Running",
"SipXbridge"=>"Running",
"SharedAppearanceAgent"=>"Running",
"ACDServer"=>"Disabled",
"sipXprovision"=>"Running",
"PageServer"=>"Running",
"ParkServer"=>"Running",
"CallResolver-Agent"=>"Disabled",
"ConfigAgent"=>"Disabled",
"sipXimbot"=>"Disabled",
"SipXrest"=>"Running",
"SIPRegistrar"=>"Running",
"SipXopenfire"=>"Disabled",
"ResourceListServer"=>"Running",
"CallResolver"=>"ConfigurationTestFailed",
"sipXmrtg"=>"Running",
"ConfigServer"=>"ConfigurationTestFailed",
"sipXacccode"=>"Running",
"FreeSWITCH"=>"Running",
"SIPXProxy"=>"Running",
"SipXrelay"=>"Running"}
sipxproc --state
--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

*| *SECNAP Network Security Corporation

- Best Mobile Solutions Product of 2011
- Best Intrusion Prevention Product
- Hot Company Finalist 2011
- Best Email Security Product
- Certified SNORT Integrator
------------------------------
This email has been scanned and certified safe by SpammerTrap®.
For Information please see http://www.spammertrap.com/
------------------------------
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/

--
~~~~~~~~~~~~~~~~~~
Tony Graziano, Manager
Telephone: [phone]
Fax: [phone]
~~~~~~~~~~~~~~~~~~
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~~~~~~~~~~~~~~~~~
Using or developing for sipXecs from SIPFoundry? Ask me about sipX-CoLab
2013!
<http://sipxcolab2013.eventbrite.com/?discount=tony2013>
Telephone: [phone]
Helpdesk Customers: http://myhelp.myitdepartment.**net<http://myhelp.myitdepartment.net>
Blog: http://blog.myitdepartment.net
_______________________________________________
List Archive: http://list.sipfoundry.org/archive/sipx-users/
--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

Post by Michael Scheidell
*| *SECNAP Network Security Corporation

- Best Mobile Solutions Product of 2011
- Best Intrusion Prevention Product
- Hot Company Finalist 2011
- Best Email Security Product
- Certified SNORT Integrator
------------------------------
This email has been scanned and certified safe by SpammerTrap®.
For Information please see http://www.spammertrap.com/
------------------------------
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/

--
~~~~~~~~~~~~~~~~~~
Tony Graziano, Manager
Telephone: [phone]
sip: ***@voice.myitdepartment.net
Fax: [phone]
~~~~~~~~~~~~~~~~~~
Linked-In Profile:
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~~~~~~~~~~~~~~~~~

Using or developing for sipXecs from SIPFoundry? Ask me about sipX-CoLab
2013!
<http://sipxcolab2013.eventbrite.com/?discount=tony2013>

[Michael Scheidell]

how do I roll back?

Post by Tony Graziano
Yes, it has those same ones, they were not there this morning either!
I expect f you roll back you might be ok. Thanks for the warning though!

and, I really fsked up. Now, I can buld from a 4.4 iso, but I need the
yum updates!


service sipxecs stop
sipxecs-setup

(set it up)

service sipxecs start
sipxecs-setup

Executing:
/sbin/service sipxecs start

Starting postgresql service: [FAILED]
psql: could not connect to server: No such file or directory
Is the server running locally and accepting
connections on Unix domain socket "/tmp/.s.PGSQL.5432"?
psql: could not connect to server: No such file or directory
Is the server running locally and accepting
connections on Unix domain socket "/tmp/.s.PGSQL.5432"?
createdb: could not connect to database postgres: could not connect to
server: No such file or directory
Is the server running locally and accepting
connections on Unix domain socket "/tmp/.s.PGSQL.5432"?
psql: could not connect to server: No such file or directory
Is the server running locally and accepting
connections on Unix domain socket "/tmp/.s.PGSQL.5432"?
psql: could not connect to server: No such file or directory
Is the server running locally and accepting
connections on Unix domain socket "/tmp/.s.PGSQL.5432"?
Starting postgresql service: [FAILED]
psql: could not connect to server: No such file or directory
Is the server running locally and accepting
connections on Unix domain socket "/tmp/.s.PGSQL.5432"?
createdb: could not connect to database postgres: could not connect to
server: No such file or directory
Is the server running locally and accepting
connections on Unix domain socket "/tmp/.s.PGSQL.5432"?
psql: could not connect to server: No such file or directory
Is the server running locally and accepting
connections on Unix domain socket "/tmp/.s.PGSQL.5432"?
psql: could not connect to server: No such file or directory
Is the server running locally and accepting
connections on Unix domain socket "/tmp/.s.PGSQL.5432"?
psql: could not connect to server: No such file or directory
Is the server running locally and accepting
connections on Unix domain socket "/tmp/.s.PGSQL.5432"?
Starting postgresql service: [FAILED]
psql: could not connect to server: No such file or directory
Is the server running locally and accepting
connections on Unix domain socket "/tmp/.s.PGSQL.5432"?
Initializing configuration database...
psql: could not connect to server: No such file or directory
Is the server running locally and accepting
connections on Unix domain socket "/tmp/.s.PGSQL.5432"?

BUILD FAILED
/etc/sipxpbx/database/database.xml:118: exec returned: 1

Total time: 3 seconds
createdb: could not connect to database postgres: could not connect to
server: No such file or directory
Is the server running locally and accepting
connections on Unix domain socket "/tmp/.s.PGSQL.5432"?
Checking bootstrap setup: [ OK ]
Checking TLS/SSL configuration: [ OK ]
Checking Per-process file descriptor limits: [ OK ]
Checking rpm configuration file updates: [ OK ]
Checking SELinux is not enforcing: [ OK ]
Checking Apache configuration: [ OK ]
Checking hostname is fully qualified: [ OK ]
Checking localhost address configured: [ OK ]
Checking localhost name is not shared: [ OK ]
Checking /tmp directory has correct permissions: [ OK ]

Starting sipXpbx:
Starting sipxsupervisor: [ OK ]
--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

Post by Tony Graziano
*| *SECNAP Network Security Corporation

* Best Mobile Solutions Product of 2011
* Best Intrusion Prevention Product
* Hot Company Finalist 2011
* Best Email Security Product
* Certified SNORT Integrator


______________________________________________________________________
This email has been scanned and certified safe by SpammerTrap(r).
For Information please see http://www.spammertrap.com/
______________________________________________________________________

[Michael Scheidell]

so, how do I (and the 50 other customers who run an yum update this
weekend), fix this? we can't install 4.4 iso (it needs yum updates!)

I am GUESSING bind-* and caching-nameserver....

I am guessing lots of folks (not just sipx) are borked!


Aug 11 16:39:54 Updated: 30:bind-libs-9.3.6-20.P1.el5_8.2.i386
Aug 11 16:39:57 Updated: initscripts-8.45.42-1.el5.centos.1.i386
Aug 11 16:39:58 Updated: 30:bind-9.3.6-20.P1.el5_8.2.i386
Aug 11 16:39:59 Updated: 30:bind-utils-9.3.6-20.P1.el5_8.2.i386
Aug 11 16:39:59 Updated: 12:dhclient-3.0.5-31.el5_8.1.i386
Aug 11 16:39:59 Updated: sudo-1.7.2p1-14.el5_8.2.i386
Aug 11 16:40:00 Updated: 30:caching-nameserver-9.3.6-20.P1.el5_8.2.i386
Aug 11 16:40:00 Updated: 12:dhcp-3.0.5-31.el5_8.1.i386

Post by Tony Graziano
Yes, it has those same ones, they were not there this morning either!
I expect f you roll back you might be ok. Thanks for the warning though!

--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

Post by Tony Graziano
*| *SECNAP Network Security Corporation

* Best Mobile Solutions Product of 2011
* Best Intrusion Prevention Product
* Hot Company Finalist 2011
* Best Email Security Product
* Certified SNORT Integrator


______________________________________________________________________
This email has been scanned and certified safe by SpammerTrap(r).
For Information please see http://www.spammertrap.com/
______________________________________________________________________

[Michael Scheidell]

don't do this:

yum downgrade bind-libs

(it wants to remove EVERYTHING

Post by Michael Scheidell
so, how do I (and the 50 other customers who run an yum update this
weekend), fix this? we can't install 4.4 iso (it needs yum updates!)
I am GUESSING bind-* and caching-nameserver....
I am guessing lots of folks (not just sipx) are borked!
Aug 11 16:39:54 Updated: 30:bind-libs-9.3.6-20.P1.el5_8.2.i386
Aug 11 16:39:57 Updated: initscripts-8.45.42-1.el5.centos.1.i386
Aug 11 16:39:58 Updated: 30:bind-9.3.6-20.P1.el5_8.2.i386
Aug 11 16:39:59 Updated: 30:bind-utils-9.3.6-20.P1.el5_8.2.i386
Aug 11 16:39:59 Updated: 12:dhclient-3.0.5-31.el5_8.1.i386
Aug 11 16:39:59 Updated: sudo-1.7.2p1-14.el5_8.2.i386
Aug 11 16:40:00 Updated: 30:caching-nameserver-9.3.6-20.P1.el5_8.2.i386
Aug 11 16:40:00 Updated: 12:dhcp-3.0.5-31.el5_8.1.i386

Post by Tony Graziano
Yes, it has those same ones, they were not there this morning either!
I expect f you roll back you might be ok. Thanks for the warning though!

--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

Post by Tony Graziano
*| *SECNAP Network Security Corporation

* Best Mobile Solutions Product of 2011
* Best Intrusion Prevention Product
* Hot Company Finalist 2011
* Best Email Security Product
* Certified SNORT Integrator

--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

Post by Michael Scheidell
*| *SECNAP Network Security Corporation

* Best Mobile Solutions Product of 2011
* Best Intrusion Prevention Product
* Hot Company Finalist 2011
* Best Email Security Product
* Certified SNORT Integrator


______________________________________________________________________
This email has been scanned and certified safe by SpammerTrap(r).
For Information please see http://www.spammertrap.com/
______________________________________________________________________

[Michael Scheidell]

ymmv. not approved by anyone at all, and it still didn't fix my problem.


service sipxecs stop
service named stop
service dhcp stop

rpm -e --nodeps bind-libs
rpm -e --nodeps bind
rpm -e --nodeps bind-utils
rpm -e --nodeps initscripts
rpm -e --nodeps dhclient
rpm -e --nodeps sudo
rpm -e --nodeps caching-nameserver
rpm -e --nodeps dhcp

yum install bind-libs-9.3.6-20.P1.el5_8.1.i386
yum install bind-utils-9.3.6-20.P1.el5_8.1.i386
yum install bind-9.3.6-20.P1.el5_8.1.i386
yum install initscripts-8.45.42-1.el5.centos.i386
yum install dhclient-3.0.5-31.el5.i386
yum install sudo-1.7.2p1-14.el5_8.i386
yum install caching-nameserver-9.3.6-20.P1.el5_8.1.i386
yum install dhcp-3.0.5-31.el5.i386

(well, trying to fix things the wrong way.. I am totally borked. going
to restore a 4.4 from iso now.
maybe wait till tomorrow.
calls come in, just not logged. what else does postgress do? why won't
it start?
--
Michael Scheidell, CTO
o: 561-999-5000
d: 561-948-2259

*| *SECNAP Network Security Corporation

* Best Mobile Solutions Product of 2011
* Best Intrusion Prevention Product
* Hot Company Finalist 2011
* Best Email Security Product
* Certified SNORT Integrator


______________________________________________________________________
This email has been scanned and certified safe by SpammerTrap(r).
For Information please see http://www.spammertrap.com/
______________________________________________________________________