Is there a roadmap date of when SipX 4.6 goes to stable?

[Jesse Becker]

All,
I tried searching before asking, however, I could find the answer. Is
there a planned live date for 4.6 going stable? The last thing I found in
the archives was someone saying real soon a few months back. The iso
library still shows that 4.4 is stable and 4.6 is beta. Is that accurate?
--
Jesse Becker | Linux+ Network+ Server+ Certified Professional
Director of Infrastructure and Compliance | IVR Technology Group LLC |
6245 Sheridan Drive | Suite 100 | Williamsville, NY. 14221 |

Phone: [phone] x210 | Email: ***@ivrtechnology.com |
www.ivrtechgroup.com

Confidentiality Notice: This e-mail is intended only for the person(s) to
whom it is addressed and may contain information that is confidential,
proprietary, privileged or otherwise protected from disclosure. If you are
not an intended recipient, please (i) do not read, copy or use this
communication, or disclose it to others, (ii) notify the sender immediately
by replying to the message, and (iii) delete the e-mail from your system.
Thank you - IVR Technology Group, LLC. Tel: [phone], Fax:
716-706-1507

[Claas Hilbrecht]

Hello Jesse,

 I tried searching before asking, however, I could find the answer. Is

[...]

library still shows that 4.4 is stable and 4.6 is beta. Is that accurate?

I've asked a similar question at 07. Nov. 2012 with the title: "wiki (and
other sites) outdated?" on this list. The answer was something like: "the
wiki and download pages are community driven, so that's why there are not
up to date".

As far as I understand sipXecs 4.6 is released. Just the information is not
up to date.

[文军]

Has anyone any experience to config Spa3102 outbound call from ext. to PSTN ? I can make call from PSTN to ext. through Spa3102 now.

I created unmanaged gateway on Spa3102 and dial plan with prefix 9, but Spa always claimed "not found" when I made outbound call.

Regards,

Jarvis.

[Todd Hodgen]

Under line - Proxy and Registration - be sure to check "Use Outbound Proxy"
and enter an outbound Proxy if not already checked.

-----Original Message-----
From: sipx-users-***@list.sipfoundry.org
[mailto:sipx-users-***@list.sipfoundry.org] On Behalf Of ??
Sent: Friday, November 16, 2012 6:26 AM
To: Discussion list for users of sipXecs software
Cc: Discussion list for users of sipXecs software
Subject: [sipx-users] Linksys SPA3102 FXO MGW Outbound Calling

Has anyone any experience to config Spa3102 outbound call from ext. to PSTN
? I can make call from PSTN to ext. through Spa3102 now.

I created unmanaged gateway on Spa3102 and dial plan with prefix 9, but Spa
always claimed "not found" when I made outbound call.

Regards,

Jarvis.

[Douglas Hubler]

short answer...
not officially released

long answer...
4.6 is not officially released even though i believe it to be more
stable than 4.4. Users that have run into issues with 4.6 may
disagree, because some are finding some issues due to the sheer amount
of changes that went into 4.6 Unfortunately we're finding issues
very slowly hence the delay.

ezuce has been using 4.6 build for quite some time so if you're doing
new installs, without question go with 4.6.

The other day the 4.6 release was horribly broken but it was found and
fix immediately. We have automated tests, but it still requires a
little manual intervention to start and run


On Wed, Nov 14, 2012 at 1:26 PM, Claas Hilbrecht

Post by Claas Hilbrecht
Hello Jesse,

Post by Jesse Becker
I tried searching before asking, however, I could find the answer. Is

[...]

Post by Jesse Becker
library still shows that 4.4 is stable and 4.6 is beta. Is that accurate?

I've asked a similar question at 07. Nov. 2012 with the title: "wiki (and
other sites) outdated?" on this list. The answer was something like: "the
wiki and download pages are community driven, so that's why there are not
up to date".
As far as I understand sipXecs 4.6 is released. Just the information is not
up to date.
--
Claas Hilbrecht
http://www.jucs-kramkiste.de
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/

[Melcon Moraes]

And for new installs on 4.6, should we yum update daily as new packages are
being compiled on a daily basis?

-
MM

Post by Douglas Hubler
short answer...
not officially released
long answer...
4.6 is not officially released even though i believe it to be more
stable than 4.4. Users that have run into issues with 4.6 may
disagree, because some are finding some issues due to the sheer amount
of changes that went into 4.6 Unfortunately we're finding issues
very slowly hence the delay.
ezuce has been using 4.6 build for quite some time so if you're doing
new installs, without question go with 4.6.
The other day the 4.6 release was horribly broken but it was found and
fix immediately. We have automated tests, but it still requires a
little manual intervention to start and run
On Wed, Nov 14, 2012 at 1:26 PM, Claas Hilbrecht

Post by Claas Hilbrecht
Hello Jesse,

Post by Jesse Becker
I tried searching before asking, however, I could find the answer. Is

[...]

Post by Jesse Becker
library still shows that 4.4 is stable and 4.6 is beta. Is that

accurate?

Post by Claas Hilbrecht
I've asked a similar question at 07. Nov. 2012 with the title: "wiki (and
other sites) outdated?" on this list. The answer was something like: "the
wiki and download pages are community driven, so that's why there are not
up to date".
As far as I understand sipXecs 4.6 is released. Just the information is

not

Post by Claas Hilbrecht
up to date.
--
Claas Hilbrecht
http://www.jucs-kramkiste.de
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/

_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/

[Michael Picher]

I would say, 'it depends'. For production systems there's always that 'if
it works...'. But we need to weigh that with getting folks to test new
updates. For pilot/testing systems, yes, update for all new patches.

Mike

Post by Melcon Moraes
And for new installs on 4.6, should we yum update daily as new packages
are being compiled on a daily basis?
-
MM

Post by Douglas Hubler
short answer...
not officially released
long answer...
4.6 is not officially released even though i believe it to be more
stable than 4.4. Users that have run into issues with 4.6 may
disagree, because some are finding some issues due to the sheer amount
of changes that went into 4.6 Unfortunately we're finding issues
very slowly hence the delay.
ezuce has been using 4.6 build for quite some time so if you're doing
new installs, without question go with 4.6.
The other day the 4.6 release was horribly broken but it was found and
fix immediately. We have automated tests, but it still requires a
little manual intervention to start and run
On Wed, Nov 14, 2012 at 1:26 PM, Claas Hilbrecht

Post by Claas Hilbrecht
Hello Jesse,

Post by Jesse Becker
I tried searching before asking, however, I could find the answer. Is

[...]

Post by Jesse Becker
library still shows that 4.4 is stable and 4.6 is beta. Is that

accurate?

Post by Claas Hilbrecht
I've asked a similar question at 07. Nov. 2012 with the title: "wiki

(and
"the

Post by Claas Hilbrecht
wiki and download pages are community driven, so that's why there are

not

Post by Claas Hilbrecht
up to date".
As far as I understand sipXecs 4.6 is released. Just the information is

not

Post by Claas Hilbrecht
up to date.
--
Claas Hilbrecht
http://www.jucs-kramkiste.de
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/

_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/

_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/

--
Michael Picher, Director of Technical Services
eZuce, Inc.

300 Brickstone Square****

Suite 201****

Andover, MA. 01810
O.978-296-1005 X2015
M.207-956-0262
@mpicher <http://twitter.com/mpicher>
linkedin <http://www.linkedin.com/profile/view?id=35504760&trk=tab_pro>
www.ezuce.com

------------------------------------------------------------------------------------------------------------
There are 10 kinds of people in the world, those who understand binary and
those who don't.