Discussion:
Upgrade from 4.2.1 to 4.6
Daniel Peinado Lopez
2012-11-27 12:41:19 UTC
Permalink
Hello,

I need to upgrade my SipXecs to 4.6. I have all data for the configuration
in one backup file. I think about doing the next:

1) Install Sipxecs 4.4 and restore the backup from 4.2.1.
2) Make a new backup in Sipxecs 4.4
3) Install Sipxecs 4.6 and restore the backup from 4.4.

ItŽs possible to restore a 4.2.1 backup in sipxecs 4.6 (only one step, from
4.2.1 to 4.6) and everything runs?

Can you tell me the best way?

Thank you very much
--
* *

Daniel Peinado López

*IANT - APPLIED NGN-TECHNOLOGIES

**Turn-Key VoIP/UC Solutions and More...


*Fon: +49 (5331) 6794 450
Fax: +49 (5331) 6794 499
Mail: ***@iant.de <***@iant.de>
Web: www.iant.de <http://www.iant.de/en/startseite>


IANT is eZuce <http://www.ezuce.com/> Elite Partner for EMEA

IANT is Member of GROUPLINK <http://www.grouplink.de/>
Tony Graziano
2012-11-27 12:46:12 UTC
Permalink
If it were me. I'd make a backup of 4.21 and do an in-place update to
4.4 (latest), then I would back it up and restore it to a 4.6 system.



On Tue, Nov 27, 2012 at 7:41 AM, Daniel Peinado Lopez
Post by Daniel Peinado Lopez
Hello,
I need to upgrade my SipXecs to 4.6. I have all data for the configuration
1) Install Sipxecs 4.4 and restore the backup from 4.2.1.
2) Make a new backup in Sipxecs 4.4
3) Install Sipxecs 4.6 and restore the backup from 4.4.
It´s possible to restore a 4.2.1 backup in sipxecs 4.6 (only one step, from
4.2.1 to 4.6) and everything runs?
Can you tell me the best way?
Thank you very much
--
Daniel Peinado López
IANT - APPLIED NGN-TECHNOLOGIES
Turn-Key VoIP/UC Solutions and More...
Fon: +49 (5331) 6794 450
Fax: +49 (5331) 6794 499
Web: www.iant.de
IANT is eZuce Elite Partner for EMEA
IANT is Member of GROUPLINK
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
--
~~~~~~~~~~~~~~~~~~
Tony Graziano, Manager
Telephone: 434.984.8430
sip: ***@voice.myitdepartment.net
Fax: 434.465.6833
~~~~~~~~~~~~~~~~~~
Linked-In Profile:
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~~~~~~~~~~~~~~~~~

Using or developing for sipXecs from SIPFoundry? Ask me about sipX-CoLab 2013!
--
LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
sip: ***@voice.myitdepartment.net

Helpdesk Customers: http://myhelp.myitdepartment.net
Blog: http://blog.myitdepartment.net
Douglas Hubler
2012-11-27 13:01:15 UTC
Permalink
Restoring from 4.2.1 into a 4.6 system might just work. You can try
the restore in a virtual machine first just to make sure it works
first. What you'd do is install 4.6 first, then restore into that
installation. Tony's method is safest.

On Tue, Nov 27, 2012 at 7:41 AM, Daniel Peinado Lopez
Post by Daniel Peinado Lopez
Hello,
I need to upgrade my SipXecs to 4.6. I have all data for the configuration
1) Install Sipxecs 4.4 and restore the backup from 4.2.1.
2) Make a new backup in Sipxecs 4.4
3) Install Sipxecs 4.6 and restore the backup from 4.4.
It´s possible to restore a 4.2.1 backup in sipxecs 4.6 (only one step, from
4.2.1 to 4.6) and everything runs?
Can you tell me the best way?
Thank you very much
--
Daniel Peinado López
IANT - APPLIED NGN-TECHNOLOGIES
Turn-Key VoIP/UC Solutions and More...
Fon: +49 (5331) 6794 450
Fax: +49 (5331) 6794 499
Web: www.iant.de
IANT is eZuce Elite Partner for EMEA
IANT is Member of GROUPLINK
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
Tony Graziano
2012-11-27 23:29:13 UTC
Permalink
If it matters to anyone, I seem to recall there were structural or DB
changes between 4.2 and 4.4. If that is the case (I could be wrong but
I'm pretty sure there were changes to the DB) it would not work well.
If I am incorrect it would not work well.

The update to 4.4 is pretty painless just make sure you send the
server its profiles and everything seems operational before backing up
to move forward if you take this route.
Post by Douglas Hubler
Restoring from 4.2.1 into a 4.6 system might just work. You can try
the restore in a virtual machine first just to make sure it works
first. What you'd do is install 4.6 first, then restore into that
installation. Tony's method is safest.
On Tue, Nov 27, 2012 at 7:41 AM, Daniel Peinado Lopez
Post by Daniel Peinado Lopez
Hello,
I need to upgrade my SipXecs to 4.6. I have all data for the configuration
1) Install Sipxecs 4.4 and restore the backup from 4.2.1.
2) Make a new backup in Sipxecs 4.4
3) Install Sipxecs 4.6 and restore the backup from 4.4.
It´s possible to restore a 4.2.1 backup in sipxecs 4.6 (only one step, from
4.2.1 to 4.6) and everything runs?
Can you tell me the best way?
Thank you very much
--
Daniel Peinado López
IANT - APPLIED NGN-TECHNOLOGIES
Turn-Key VoIP/UC Solutions and More...
Fon: +49 (5331) 6794 450
Fax: +49 (5331) 6794 499
Web: www.iant.de
IANT is eZuce Elite Partner for EMEA
IANT is Member of GROUPLINK
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
--
~~~~~~~~~~~~~~~~~~
Tony Graziano, Manager
Telephone: 434.984.8430
sip: ***@voice.myitdepartment.net
Fax: 434.465.6833
~~~~~~~~~~~~~~~~~~
Linked-In Profile:
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~~~~~~~~~~~~~~~~~

Using or developing for sipXecs from SIPFoundry? Ask me about sipX-CoLab 2013!
--
LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
sip: ***@voice.myitdepartment.net

Helpdesk Customers: http://myhelp.myitdepartment.net
Blog: http://blog.myitdepartment.net
Daniel Peinado
2012-11-28 12:31:15 UTC
Permalink
Hello,

I have installed the sipxecs 4.2.1. My setup has 1 master Sipxecs and one slave. I try to restore the backup and I do the next.

1) install sipxecs (1 master) 4.2.1 and yum update
2) install sipxecs (2 slave) 4.2.1 and yum update
3) add slave server in sipxecs interface and send profiles.
4) restart servers and everything runs good.
5) restore backup from the interface. It seems to restore right, but when I restart the servers ( I must restart because sipxecs requires) I have problems with the slave server. The restart option goes wrong. I tried to setup again the slave server, but I have the same problem. What I'm doing wrong?

Thank you

Daniel Peinado López
Post by Tony Graziano
If it matters to anyone, I seem to recall there were structural or DB
changes between 4.2 and 4.4. If that is the case (I could be wrong but
I'm pretty sure there were changes to the DB) it would not work well.
If I am incorrect it would not work well.
The update to 4.4 is pretty painless just make sure you send the
server its profiles and everything seems operational before backing up
to move forward if you take this route.
Post by Douglas Hubler
Restoring from 4.2.1 into a 4.6 system might just work. You can try
the restore in a virtual machine first just to make sure it works
first. What you'd do is install 4.6 first, then restore into that
installation. Tony's method is safest.
On Tue, Nov 27, 2012 at 7:41 AM, Daniel Peinado Lopez
Post by Daniel Peinado Lopez
Hello,
I need to upgrade my SipXecs to 4.6. I have all data for the configuration
1) Install Sipxecs 4.4 and restore the backup from 4.2.1.
2) Make a new backup in Sipxecs 4.4
3) Install Sipxecs 4.6 and restore the backup from 4.4.
It´s possible to restore a 4.2.1 backup in sipxecs 4.6 (only one step, from
4.2.1 to 4.6) and everything runs?
Can you tell me the best way?
Thank you very much
--
Daniel Peinado López
IANT - APPLIED NGN-TECHNOLOGIES
Turn-Key VoIP/UC Solutions and More...
Fon: +49 (5331) 6794 450
Fax: +49 (5331) 6794 499
Web: www.iant.de
IANT is eZuce Elite Partner for EMEA
IANT is Member of GROUPLINK
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
--
~~~~~~~~~~~~~~~~~~
Tony Graziano, Manager
Telephone: 434.984.8430
Fax: 434.465.6833
~~~~~~~~~~~~~~~~~~
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~~~~~~~~~~~~~~~~~
Using or developing for sipXecs from SIPFoundry? Ask me about sipX-CoLab 2013!
--
Telephone: 434.984.8426
Helpdesk Customers: http://myhelp.myitdepartment.net
Blog: http://blog.myitdepartment.net
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
Michael Picher
2012-11-28 18:38:21 UTC
Permalink
Daniel,

Are you trying to do 4.2.1 in a virtual?

If so, here's what I'd do.

Get 4.2.1 installed in one virt with same IP and same host name as the
master.
Restore configuration and voicemail.
In the GUI, remove the second server.
Send profiles.
Now, do an in-place upgrade of a single server system to 4.4.
Backup the 4.4 system.
Build a new clean 4.6 server.
Restore 4.4 backup

Mike
Post by Daniel Peinado Lopez
Hello,
I have installed the sipxecs 4.2.1. My setup has 1 master Sipxecs and one
slave. I try to restore the backup and I do the next.
1) install sipxecs (1 master) 4.2.1 and yum update
2) install sipxecs (2 slave) 4.2.1 and yum update
3) add slave server in sipxecs interface and send profiles.
4) restart servers and everything runs good.
5) restore backup from the interface. It seems to restore right, but when
I restart the servers ( I must restart because sipxecs requires) I have
problems with the slave server. The restart option goes wrong. I tried to
setup again the slave server, but I have the same problem. What I'm doing
wrong?
Thank you
Daniel Peinado López
Post by Tony Graziano
If it matters to anyone, I seem to recall there were structural or DB
changes between 4.2 and 4.4. If that is the case (I could be wrong but
I'm pretty sure there were changes to the DB) it would not work well.
If I am incorrect it would not work well.
The update to 4.4 is pretty painless just make sure you send the
server its profiles and everything seems operational before backing up
to move forward if you take this route.
Post by Douglas Hubler
Restoring from 4.2.1 into a 4.6 system might just work. You can try
the restore in a virtual machine first just to make sure it works
first. What you'd do is install 4.6 first, then restore into that
installation. Tony's method is safest.
On Tue, Nov 27, 2012 at 7:41 AM, Daniel Peinado Lopez
Post by Daniel Peinado Lopez
Hello,
I need to upgrade my SipXecs to 4.6. I have all data for the
configuration
Post by Tony Graziano
Post by Douglas Hubler
Post by Daniel Peinado Lopez
1) Install Sipxecs 4.4 and restore the backup from 4.2.1.
2) Make a new backup in Sipxecs 4.4
3) Install Sipxecs 4.6 and restore the backup from 4.4.
ItŽs possible to restore a 4.2.1 backup in sipxecs 4.6 (only one step,
from
Post by Tony Graziano
Post by Douglas Hubler
Post by Daniel Peinado Lopez
4.2.1 to 4.6) and everything runs?
Can you tell me the best way?
Thank you very much
--
Daniel Peinado López
IANT - APPLIED NGN-TECHNOLOGIES
Turn-Key VoIP/UC Solutions and More...
Fon: +49 (5331) 6794 450
Fax: +49 (5331) 6794 499
Web: www.iant.de
IANT is eZuce Elite Partner for EMEA
IANT is Member of GROUPLINK
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
--
~~~~~~~~~~~~~~~~~~
Tony Graziano, Manager
Telephone: 434.984.8430
Fax: 434.465.6833
~~~~~~~~~~~~~~~~~~
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~~~~~~~~~~~~~~~~~
Using or developing for sipXecs from SIPFoundry? Ask me about sipX-CoLab
2013!
Post by Tony Graziano
--
Telephone: 434.984.8426
Helpdesk Customers: http://myhelp.myitdepartment.net
Blog: http://blog.myitdepartment.net
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
--
Michael Picher, Director of Technical Services
eZuce, Inc.

300 Brickstone Square****

Suite 201****

Andover, MA. 01810
O.978-296-1005 X2015
M.207-956-0262
@mpicher <http://twitter.com/mpicher>
linkedin <http://www.linkedin.com/profile/view?id=35504760&trk=tab_pro>
www.ezuce.com

------------------------------------------------------------------------------------------------------------
There are 10 kinds of people in the world, those who understand binary and
those who don't.
Tony Graziano
2012-11-28 18:42:51 UTC
Permalink
In 4.2-4.4 you should use the same hostname/IP/sip domain before doing your
restore.

Did you take those steps?
Post by Daniel Peinado Lopez
Hello,
I have installed the sipxecs 4.2.1. My setup has 1 master Sipxecs and one
slave. I try to restore the backup and I do the next.
1) install sipxecs (1 master) 4.2.1 and yum update
2) install sipxecs (2 slave) 4.2.1 and yum update
3) add slave server in sipxecs interface and send profiles.
4) restart servers and everything runs good.
5) restore backup from the interface. It seems to restore right, but when
I restart the servers ( I must restart because sipxecs requires) I have
problems with the slave server. The restart option goes wrong. I tried to
setup again the slave server, but I have the same problem. What I'm doing
wrong?
Thank you
Daniel Peinado López
Post by Tony Graziano
If it matters to anyone, I seem to recall there were structural or DB
changes between 4.2 and 4.4. If that is the case (I could be wrong but
I'm pretty sure there were changes to the DB) it would not work well.
If I am incorrect it would not work well.
The update to 4.4 is pretty painless just make sure you send the
server its profiles and everything seems operational before backing up
to move forward if you take this route.
Post by Douglas Hubler
Restoring from 4.2.1 into a 4.6 system might just work. You can try
the restore in a virtual machine first just to make sure it works
first. What you'd do is install 4.6 first, then restore into that
installation. Tony's method is safest.
On Tue, Nov 27, 2012 at 7:41 AM, Daniel Peinado Lopez
Post by Daniel Peinado Lopez
Hello,
I need to upgrade my SipXecs to 4.6. I have all data for the
configuration
Post by Tony Graziano
Post by Douglas Hubler
Post by Daniel Peinado Lopez
1) Install Sipxecs 4.4 and restore the backup from 4.2.1.
2) Make a new backup in Sipxecs 4.4
3) Install Sipxecs 4.6 and restore the backup from 4.4.
ItŽs possible to restore a 4.2.1 backup in sipxecs 4.6 (only one step,
from
Post by Tony Graziano
Post by Douglas Hubler
Post by Daniel Peinado Lopez
4.2.1 to 4.6) and everything runs?
Can you tell me the best way?
Thank you very much
--
Daniel Peinado López
IANT - APPLIED NGN-TECHNOLOGIES
Turn-Key VoIP/UC Solutions and More...
Fon: +49 (5331) 6794 450
Fax: +49 (5331) 6794 499
Web: www.iant.de
IANT is eZuce Elite Partner for EMEA
IANT is Member of GROUPLINK
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
--
~~~~~~~~~~~~~~~~~~
Tony Graziano, Manager
Telephone: 434.984.8430
Fax: 434.465.6833
~~~~~~~~~~~~~~~~~~
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~~~~~~~~~~~~~~~~~
Using or developing for sipXecs from SIPFoundry? Ask me about sipX-CoLab
2013!
Post by Tony Graziano
--
Telephone: 434.984.8426
Helpdesk Customers: http://myhelp.myitdepartment.net
Blog: http://blog.myitdepartment.net
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
--
LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
sip: ***@voice.myitdepartment.net

Helpdesk Customers: http://myhelp.myitdepartment.net
Blog: http://blog.myitdepartment.net
Daniel Peinado
2012-11-29 15:14:38 UTC
Permalink
Hello,

I have already restored to 4.6. I did a backup when I had the 4.4 version, then I did a new setup (total format) with the 4.6.
After that I updated the complet system, and in the end I restored the 4.4 backup. My surprise is that I can't access to sipxecs interface. It says that my user ID and PIN is not valid. I tried to reset this pin with the command /etc/init.d/sipxconfig reset-admin
But doesn't work. I got this message:

Log4j:WARN No such property [conversionPattern] in org.sipfoundry.commons.log4j.sipfoundrylayout.

What can I do?

PD: before restore my backup in 4.6, the sipxecs master and slave worked fine. All proccess in server 1 and 2 were right.


Daniel Peinado López
In 4.2-4.4 you should use the same hostname/IP/sip domain before doing your restore.
Did you take those steps?
Post by Daniel Peinado Lopez
Hello,
I have installed the sipxecs 4.2.1. My setup has 1 master Sipxecs and one slave. I try to restore the backup and I do the next.
1) install sipxecs (1 master) 4.2.1 and yum update
2) install sipxecs (2 slave) 4.2.1 and yum update
3) add slave server in sipxecs interface and send profiles.
4) restart servers and everything runs good.
5) restore backup from the interface. It seems to restore right, but when I restart the servers ( I must restart because sipxecs requires) I have problems with the slave server. The restart option goes wrong. I tried to setup again the slave server, but I have the same problem. What I'm doing wrong?
Thank you
Daniel Peinado López
Post by Tony Graziano
If it matters to anyone, I seem to recall there were structural or DB
changes between 4.2 and 4.4. If that is the case (I could be wrong but
I'm pretty sure there were changes to the DB) it would not work well.
If I am incorrect it would not work well.
The update to 4.4 is pretty painless just make sure you send the
server its profiles and everything seems operational before backing up
to move forward if you take this route.
Post by Douglas Hubler
Restoring from 4.2.1 into a 4.6 system might just work. You can try
the restore in a virtual machine first just to make sure it works
first. What you'd do is install 4.6 first, then restore into that
installation. Tony's method is safest.
On Tue, Nov 27, 2012 at 7:41 AM, Daniel Peinado Lopez
Post by Daniel Peinado Lopez
Hello,
I need to upgrade my SipXecs to 4.6. I have all data for the configuration
1) Install Sipxecs 4.4 and restore the backup from 4.2.1.
2) Make a new backup in Sipxecs 4.4
3) Install Sipxecs 4.6 and restore the backup from 4.4.
ItÂŽs possible to restore a 4.2.1 backup in sipxecs 4.6 (only one step, from
4.2.1 to 4.6) and everything runs?
Can you tell me the best way?
Thank you very much
--
Daniel Peinado López
IANT - APPLIED NGN-TECHNOLOGIES
Turn-Key VoIP/UC Solutions and More...
Fon: +49 (5331) 6794 450
Fax: +49 (5331) 6794 499
Web: www.iant.de
IANT is eZuce Elite Partner for EMEA
IANT is Member of GROUPLINK
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
--
~~~~~~~~~~~~~~~~~~
Tony Graziano, Manager
Telephone: 434.984.8430
Fax: 434.465.6833
~~~~~~~~~~~~~~~~~~
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~~~~~~~~~~~~~~~~~
Using or developing for sipXecs from SIPFoundry? Ask me about sipX-CoLab 2013!
--
Telephone: 434.984.8426
Helpdesk Customers: http://myhelp.myitdepartment.net
Blog: http://blog.myitdepartment.net
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
Telephone: 434.984.8426
Helpdesk Customers: http://myhelp.myitdepartment.net
Blog: http://blog.myitdepartment.net
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
Daniel Peinado Lopez
2012-11-30 10:51:38 UTC
Permalink
Hi,

We have found the solution. We had changed the PIN of the superadmin in the
database, and now everything is OK. We will test some features.

There is a problem with the passwords. When the password has not numeric
characters, the encryption is not correct. ( I refer when we restore a
backup)

Greetings
Post by Daniel Peinado Lopez
Hello,
I have already restored to 4.6. I did a backup when I had the 4.4 version,
then I did a new setup (total format) with the 4.6.
After that I updated the complet system, and in the end I restored the 4.4
backup. My surprise is that I can't access to sipxecs interface. It says
that my user ID and PIN is not valid. I tried to reset this pin with the
command /etc/init.d/sipxconfig reset-admin
Log4j:WARN No such property [conversionPattern] in
org.sipfoundry.commons.log4j.sipfoundrylayout.
What can I do?
PD: before restore my backup in 4.6, the sipxecs master and slave worked
fine. All proccess in server 1 and 2 were right.
Daniel Peinado López
In 4.2-4.4 you should use the same hostname/IP/sip domain before doing your restore.
Did you take those steps?
Post by Daniel Peinado Lopez
Hello,
I have installed the sipxecs 4.2.1. My setup has 1 master Sipxecs and one
slave. I try to restore the backup and I do the next.
1) install sipxecs (1 master) 4.2.1 and yum update
2) install sipxecs (2 slave) 4.2.1 and yum update
3) add slave server in sipxecs interface and send profiles.
4) restart servers and everything runs good.
5) restore backup from the interface. It seems to restore right, but when
I restart the servers ( I must restart because sipxecs requires) I have
problems with the slave server. The restart option goes wrong. I tried to
setup again the slave server, but I have the same problem. What I'm doing
wrong?
Thank you
Daniel Peinado López
Post by Tony Graziano
If it matters to anyone, I seem to recall there were structural or DB
changes between 4.2 and 4.4. If that is the case (I could be wrong but
I'm pretty sure there were changes to the DB) it would not work well.
If I am incorrect it would not work well.
The update to 4.4 is pretty painless just make sure you send the
server its profiles and everything seems operational before backing up
to move forward if you take this route.
Post by Douglas Hubler
Restoring from 4.2.1 into a 4.6 system might just work. You can try
the restore in a virtual machine first just to make sure it works
first. What you'd do is install 4.6 first, then restore into that
installation. Tony's method is safest.
On Tue, Nov 27, 2012 at 7:41 AM, Daniel Peinado Lopez
Post by Daniel Peinado Lopez
Hello,
I need to upgrade my SipXecs to 4.6. I have all data for the
configuration
Post by Tony Graziano
Post by Douglas Hubler
Post by Daniel Peinado Lopez
1) Install Sipxecs 4.4 and restore the backup from 4.2.1.
2) Make a new backup in Sipxecs 4.4
3) Install Sipxecs 4.6 and restore the backup from 4.4.
ItŽs possible to restore a 4.2.1 backup in sipxecs 4.6 (only one
step, from
Post by Tony Graziano
Post by Douglas Hubler
Post by Daniel Peinado Lopez
4.2.1 to 4.6) and everything runs?
Can you tell me the best way?
Thank you very much
--
Daniel Peinado López
IANT - APPLIED NGN-TECHNOLOGIES
Turn-Key VoIP/UC Solutions and More...
Fon: +49 (5331) 6794 450
Fax: +49 (5331) 6794 499
Web: www.iant.de
IANT is eZuce Elite Partner for EMEA
IANT is Member of GROUPLINK
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
--
~~~~~~~~~~~~~~~~~~
Tony Graziano, Manager
Telephone: 434.984.8430
Fax: 434.465.6833
~~~~~~~~~~~~~~~~~~
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~~~~~~~~~~~~~~~~~
Using or developing for sipXecs from SIPFoundry? Ask me about
sipX-CoLab 2013!
Post by Tony Graziano
--
Telephone: 434.984.8426
Helpdesk Customers: http://myhelp.myitdepartment.net
Blog: http://blog.myitdepartment.net
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
Telephone: 434.984.8426
Helpdesk Customers: http://myhelp.myitdepartment.**net<http://myhelp.myitdepartment.net>
Blog: http://blog.myitdepartment.net
_______________________________________________
sipx-users mailing list
List Archive: http://list.sipfoundry.org/archive/sipx-users/
--
* *

Daniel Peinado López

*IANT - APPLIED NGN-TECHNOLOGIES

**Turn-Key VoIP/UC Solutions and More...


*Fon: +49 (5331) 6794 450
Fax: +49 (5331) 6794 499
Mail: ***@iant.de <***@iant.de>
Web: www.iant.de <http://www.iant.de/en/startseite>


IANT is eZuce <http://www.ezuce.com/> Elite Partner for EMEA

IANT is Member of GROUPLINK <http://www.grouplink.de/>
Douglas Hubler
2012-11-30 11:02:10 UTC
Permalink
On Fri, Nov 30, 2012 at 5:51 AM, Daniel Peinado Lopez
Post by Daniel Peinado Lopez
There is a problem with the passwords. When the password has not numeric
characters, the encryption is not correct. ( I refer when we restore a
backup)
I know the issue. When restoring, we attempt to crack the password
using brute force and we only attempt numeric combinations.
superadmin would rarely have a numeric pin. The recovery UI allows
you to specify default password for uncrackable passwords, that
password would have been what you would have used to get in.

Loading...